The Massey Ferguson 2760E tractor primary air filter part number is 3703703M91. The inner safety filter is 3703704M91.
Massey Ferguson 2760E Air Filter Details
Primary air filter part number
3703703M91
Inner safety air filter part number
3703704M91
Outer air filter part number
7068069M1
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
300 hrs
Light use
600 hrs
These are practical inspection/replacement guide ranges for the utility tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 2760E Extra Air Filter Notes
Engine model
Shibaura 2.2L
Engine displacement
2.2 L | 134.3 cu in
Engine horsepower
57.3 hp | 42.7 kW
Primary filter note
For the Massey Ferguson 2760E, the listed primary air filter part number is 3703703M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 7068069M1.
Safety filter note
The listed inner safety air filter is 3703704M91. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
This sits in the utility range. The 300-hour guide is useful for planning, but dusty work should shorten the inspection cycle.
Engine airflow note
Displacement and horsepower together explain airflow demand better than either one alone, but the air-cleaner housing still proves fit.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 2760E Air Filter FAQs
What is the safest way to match a Massey Ferguson 2760E air filter?
Treat 3703703M91 as the hero value, not the whole truth. Serial range, engine swaps and different air-cleaner housings can beat a generic online listing.
How do I avoid mixing up the Massey Ferguson 2760E air-filter elements?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 7068069M1 when you meant the safety filter, or 3703704M91 when you meant the outer filter.
What part-number mistake should I avoid on a Massey Ferguson 2760E?
Multiple numbers are useful only if each one is tied to the correct element position. Wrong element in the right brand is still wrong.
Can the Massey Ferguson 2760E lose power from a dirty air filter?
This sits in the utility range. The 300-hour guide is useful for planning, but dusty work should shorten the inspection cycle.
Should I buy separate outer and primary filters for a Massey Ferguson 2760E?
The outer filter is the dirt-catcher; the inner filter is the backup. Service them with different expectations instead of replacing both out of habit.
Why combine Massey Ferguson 2760E displacement and horsepower when checking filters?
Displacement and horsepower together explain airflow demand better than either one alone, but the air-cleaner housing still proves fit.
What mistake ruins the point of the Massey Ferguson 2760E safety filter?
Because the setup includes a safety element, service the primary element first and inspect the inside of the housing. If dust reached the safety element, the job is no longer just a quick outer-filter swap.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
