The Massey Ferguson 154 tractor cooling system capacity is 2.7 gal | 10.4 L, coolant type is 50/50 ethylene glycol-based coolant, and coolant change interval is massey Ferguson’s official coolant change interval is part of the Premium service plan, which includes engine coolant.
Massey Ferguson 154 Coolant Capacity Details
Cooling system capacity
2.7 gal | 10.4 L
Coolant type
50/50 ethylene glycol-based coolant
Coolant change interval
Massey Ferguson’s official coolant change interval is part of the Premium service plan, which includes engine coolant
Radiator cap pressure
10 psi | 69 kPa
Coolant Capacity Comparison Chart
Coolant Capacity Comparison
This model
2.7 gal
Average
2.8 gal
Low
1.5 gal
High
5 gal
Benchmarks use practical low, average and high coolant-capacity ranges for the compact tractor category. Use the exact tractor manual before buying coolant.
Massey Ferguson 154 Extra Coolant Notes
Engine horsepower
50 hp | 37.3 kW
Engine displacement
2.5 L | 152.7 cu in
Capacity note
For the Massey Ferguson 154, the listed cooling system capacity is 2.7 gal | 10.4 L. Buy slightly more coolant than the exact capacity so you have enough for topping off after air burps out.
Mixture note
Use the coolant type listed above and match the antifreeze/water mix to the operator manual and local freezing conditions.
Radiator cap note
The radiator cap pressure listed for the Massey Ferguson 154 is 10 psi | 69 kPa. Do not replace it with a random cap unless the pressure rating matches.
Refill note
Refill slowly, run the tractor until warm with the heater circuit open if fitted, let it cool, then recheck the coolant level. Never remove a hot radiator cap under pressure.
Massey Ferguson 154 Coolant FAQs
How much coolant does a Massey Ferguson 154 take?
The Massey Ferguson 154 takes 2.7 gal | 10.4 L of coolant. That is about normal for the compact tractor benchmark shown here, so plan it like a standard drain-and-refill rather than a tiny top-up.
Is the Massey Ferguson 154 coolant capacity normal?
Yes, 2.7 gal | 10.4 L lands about where you would expect for this tractor category. The main thing is buying enough for a complete refill plus a small top-off amount.
How many coolant jugs do I need for a Massey Ferguson 154?
This is a manageable refill amount. A 2.7 gal | 10.4 L system needs about 3 one-gallon containers if you are using premixed coolant. If using concentrate at a 50/50 mix, plan on about 1.4 gal of concentrate and 1.4 gal of distilled water. In metric terms, that is roughly 3 x 5 L containers for a full premix refill.
What coolant should I use in a Massey Ferguson 154?
The listed coolant is 50/50 ethylene glycol-based coolant. Ethylene glycol tells you the base coolant, but the additive package still matters on diesel engines, so match the manual or an approved equivalent.
Can I use a different radiator cap on a Massey Ferguson 154?
The listed cap pressure is 10 psi | 69 kPa. Use the same pressure rating when replacing it. The cap is part of the cooling system, not just a lid, and the wrong rating can cause boil-over, leaks or pressure problems.
When should the Massey Ferguson 154 coolant be changed?
The listed interval is massey Ferguson’s official coolant change interval is part of the Premium service plan, which includes engine coolant. Treat it as a service limit, not just a suggestion, because old coolant can lose corrosion protection before it looks bad.
Official information note
Mistakes do happen. Coolant specs can change by year, engine, market, radiator option and coolant chemistry. Check the operator manual, parts book and official masseyferguson.com website before draining, flushing or refilling the cooling system.
