The Massey Ferguson 1225 tractor cooling system capacity is 1.9 gal | 7.1 L.
Massey Ferguson 1225 Coolant Capacity Details
Cooling system capacity
1.9 gal | 7.1 L
Coolant mixture ratio
50/50 antifreeze and water
Radiator cap pressure
10 psi | 70 kPa
Coolant Capacity Comparison Chart
Coolant Capacity Comparison
This model
1.9 gal
Average
2.8 gal
Low
1.5 gal
High
5 gal
Benchmarks use practical low, average and high coolant-capacity ranges for the compact tractor category. Use the exact tractor manual before buying coolant.
Massey Ferguson 1225 Extra Coolant Notes
Engine horsepower
24.3 hp | 18.1 kW
Engine displacement
1.1 L | 68.5 cu in
Capacity note
For the Massey Ferguson 1225, the listed cooling system capacity is 1.9 gal | 7.1 L. Buy slightly more coolant than the exact capacity so you have enough for topping off after air burps out.
Mixture note
50/50 antifreeze and water.
Radiator cap note
The radiator cap pressure listed for the Massey Ferguson 1225 is 10 psi | 70 kPa. Do not replace it with a random cap unless the pressure rating matches.
Refill note
Refill slowly, run the tractor until warm with the heater circuit open if fitted, let it cool, then recheck the coolant level. Never remove a hot radiator cap under pressure.
Massey Ferguson 1225 Coolant FAQs
How much coolant does a Massey Ferguson 1225 take?
The Massey Ferguson 1225 takes 1.9 gal | 7.1 L of coolant. That is below the average compact tractor benchmark, so it is not a huge coolant job, but you still want spare premix for topping off.
Is 1.9 gal | 7.1 L a small coolant capacity for a Massey Ferguson 1225?
It is below average compared with the benchmark on this page. That makes the job cheaper, but it does not make coolant choice or bleeding less important.
How many coolant jugs do I need for a Massey Ferguson 1225?
This is a manageable refill amount. A 1.9 gal | 7.1 L system needs about 2 one-gallon containers if you are using premixed coolant. If using concentrate at a 50/50 mix, plan on about 0.9 gal of concentrate and 0.9 gal of distilled water. In metric terms, that is roughly 2 x 5 L containers for a full premix refill.
How much concentrate and water does a Massey Ferguson 1225 need?
With the listed 50/50 antifreeze and water mix, a full 1.9 gal | 7.1 L refill works out to about 0.9 gal of antifreeze concentrate and 0.9 gal of distilled water. If using premix, do not add extra water unless the product label says to.
Can I use a different radiator cap on a Massey Ferguson 1225?
The listed cap pressure is 10 psi | 70 kPa. Use the same pressure rating when replacing it. The cap is part of the cooling system, not just a lid, and the wrong rating can cause boil-over, leaks or pressure problems.
Is the Massey Ferguson 1225 coolant capacity large for its engine?
The Massey Ferguson 1225 has 24.3 hp | 18.1 kW and 1.1 L | 68.5 cu in listed alongside a 1.9 gal | 7.1 L cooling system. That is a fairly normal relationship between engine size and cooling-system volume. Coolant capacity is not decided by displacement alone; the radiator, hoses, block passages and options all count.
Official information note
Mistakes do happen. Coolant specs can change by year, engine, market, radiator option and coolant chemistry. Check the operator manual, parts book and official masseyferguson.com website before draining, flushing or refilling the cooling system.
