Mahindra 4035 Specifications

The Mahindra 4035 specifications include engine power rated at 40 hp (29.8 kW), a synchro shuttle, power shuttle, or hydrostatic transmission, and a listed weight of 4,367 to 4,817 lbs.

Mahindra 4035 key specifications

Engine power 40 hp (29.8 kW)
PTO power 33 hp (24.6 kW, gear)
Displacement 115.4 cu in (1.9 L)
Transmission synchro shuttle, power shuttle, or hydrostatic
Weight 4,367 to 4,817 lbs
Rear PTO speed 540 rpm

Mahindra 4035 industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power40 hp
Low 10 hpAverage 48.1 hpHigh 180 hp
PTO power33 hp
Low 10.8 hpAverage 48.8 hpHigh 139 hp
Displacement1.9 L
Low 0.4 LAverage 2.6 LHigh 7.3 L
Maximum listed weight4,817 lbs
Low 1,090 lbsAverage 5,021.9 lbsHigh 12,875 lbs
This model Industry average

Mahindra 4035 power chart

Compare the available engine, PTO and drawbar power ratings.

Engine power40 hp
PTO power33 hp

Mahindra 4035 dimensions chart

Compare the main listed tractor dimensions using centimetres.

Length314 cm
Width187 cm

Power and performance

Original price $23,720 in 2013 (hydro)

Engine specifications

Compression 19.5:1
Fuel system direct injection
Starter electric
Starter volts 12
Emissions Tier IV

Transmission options

Gear options 12 forward and reverse or infinite forward and reverse (3-range)
Clutch dry disc or wet disc

PTO and hitch

Rear hitch category Category I
Rear lift 3,090 lbs (1,401 kg)
Rear PTO independent
PTO engine speed 540 PTO rpm at 2,404 engine rpm

Hydraulics

Hydraulic type open center
Rear valves 0 to 2
Total flow 11 gpm (41.6 L/min)
Steering flow 5 gpm (18.9 L/min)

Mechanical specifications

Steering hydrostatic power

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 45
Battery volts 12
Battery AH 96

Dimensions and weight

Listed weight range 4,367 to 4,817 lbs
Length 123.9 inches (314 cm)
Width 73.7 inches (187 cm)
Operating weight 4,367 lbs (1,980 kg, gear)

Tires and tread

Front tire 9.5-16
Rear tire 14.9-24
Industrial front tire 12-16.5
Industrial rear tire 16.9-24

Attachments

Backhoe type Mahindra 485 Backhoe
Attachment weight 1,010 lbs (458 kg) or 1,285 lbs (582 kg)
Digging depth 101 inches (256 cm)
Bucket force 3,895 lbs (1,766 kg)
Dipperstick force 2,358 lbs (1,069 kg)
Raise time 4.9 seconds
dump 3.8s
Lowering time 4.1 seconds
Bucket width 72 inches (182 cm)
Bucket capacity 0.61 cu yd 0.5 cu m

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Mahindra website or the tractor’s operator manual.