The Kubota MX5200 has a 3-point hitch lift capacity of 2,315 lb (1,050 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 / Category 2 and hydraulic pump flow 14.4 gpm (54.5 L/min).
Best rear lift figure2,315 lb (1,050 kg)
Lift at 24 inches2,315 lb (1,050 kg)
Hitch categoryCategory 1 / Category 2
Kubota MX5200 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,800 lb (1,270 kg)
Lift capacity at 24 inches behind link ends
2,315 lb (1,050 kg)
Hitch category
Category 1 / Category 2
Hydraulic pump flow
14.4 gpm (54.5 L/min)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,315 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,315 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
14.4 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Kubota MX5200 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota MX5200 rear hitch spec points to 2,315 lb (1,050 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota MX5200, start with Category 1 / Category 2, then check lift capacity and tractor stability
Hydraulic flow note
Hydraulic pump flow is listed as 14.4 gpm (54.5 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Rear implement matching
The practical reason to check rear lift on the Kubota MX5200 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota MX5200 3-Point Hitch FAQ
What is the Kubota MX5200 3-point hitch lift capacity?
The Kubota MX5200 is listed with 2,315 lb (1,050 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota MX5200 24-inch lift capacity mean?
It means the Kubota MX5200 is rated to lift 2,315 lb (1,050 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota MX5200 use any rear implement?
No. Start with the Category 1 / Category 2 hitch category, then check implement weight against the 2,315 lb (1,050 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota MX5200 lift?
Use the 2,315 lb (1,050 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 1 / Category 2 before choosing the implement.
Does hydraulic pump flow matter for the Kubota MX5200?
Yes, but it is not the same as lift capacity. The Kubota MX5200 is listed at 14.4 gpm (54.5 L/min) hydraulic pump flow, while the rear lift number tells you what the hitch can raise.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
