The Kubota M8560 coolant capacity is listed as 2.17 gal (8.2 L). It also lists antifreeze mix 50/50 coolant and water mix.
Coolant capacity2.17 gal (8.2 L)
Antifreeze mix50/50 coolant and water mix
Kubota M8560 Coolant Capacity
Coolant capacity
2.17 gal (8.2 L)
Cooling system capacity
2.17 gal (8.2 L)
Radiator capacity
2.17 gal (8.2 L)
Antifreeze mix
50/50 coolant and water mix
Engine model
V3800-CR-TE4
Engine horsepower
85.6 hp (63.8 kW)
Engine displacement
3.8 L (231.9 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
2.17 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
86 hp
Average
75 hp
Low
40 hp
High
125 hp
Engine displacement comparison
This model
3.8 L
Average
3.5 L
Low
1.8 L
High
6 L
Kubota M8560 Coolant and Engine Notes
Coolant capacity note
The headline cooling-system number for the Kubota M8560 is 2.17 gal (8.2 L). Buy enough coolant before opening the drain plug
Radiator capacity note
Radiator capacity is listed as 2.17 gal (8.2 L). The full cooling system can be higher because coolant also sits in the engine and hoses
Antifreeze mix note
The 50/50 coolant and water mix mix gives the Kubota M8560 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note
The Kubota M8560 engine data captured here is engine model V3800-CR-TE4, engine horsepower 85.6 hp (63.8 kW), and displacement 3.8 L (231.9 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
For a coolant change on the Kubota M8560, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed
Kubota M8560 Coolant Capacity FAQ
What is the Kubota M8560 coolant capacity?
The Kubota M8560 coolant capacity is listed as 2.17 gal (8.2 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota M8560?
No. Use the coolant type specified in the manual or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota M8560?
Premixed coolant can be fine if it matches the coolant type specified in the manual and the required mix. The captured mix for the Kubota M8560 is 50/50 coolant and water mix.
How often should I change coolant in the Kubota M8560?
The captured coolant change interval for the Kubota M8560 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
What engine specs affect Kubota M8560 coolant capacity?
The captured engine context is engine model V3800-CR-TE4, horsepower 85.6 hp (63.8 kW), and displacement 3.8 L (231.9 cu in). Engine size is one reason coolant capacity changes between tractors.
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
