The Kubota M4950 has a 3-point hitch lift capacity of 2,980 lb (1,352 kg) at 24 inches behind the link ends. It also lists hydraulic pump flow 9.5 gpm (36 L/min) and operating weight 5,800 lb (2,631 kg).
Best rear lift figure2,980 lb (1,352 kg)
Lift at 24 inches2,980 lb (1,352 kg)
Operating weight5,800 lb (2,631 kg)
Kubota M4950 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,860 lb (1,751 kg)
Lift capacity at 24 inches behind link ends
2,980 lb (1,352 kg)
Hydraulic pump flow
9.5 gpm (36 L/min)
Operating weight
5,800 lb (2,631 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
9.5 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
5,800 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota M4950 Hitch and Rear Lift Notes
Rear lift capacity note
For implement matching, the Kubota M4950 should be judged from the 2,980 lb (1,352 kg) lift at 24 inches behind the link ends figure. That gives a better real-world read than horsepower alone
24-inch lift note
A 24-inch rating matters because weight gets harder to lift as it moves farther behind the tractor
Hydraulic flow note
The 9.5 gpm (36 L/min) hydraulic flow figure helps round out the Kubota M4950’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 5,800 lb (2,631 kg) operating weight gives context for the Kubota M4950’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
The Kubota M4950 hitch spec is useful because it helps judge whether attachments like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box are in the right size range
Kubota M4950 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota M4950?
Rear lift capacity for the Kubota M4950 is shown as 2,980 lb (1,352 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota M4950 is listed at 2,980 lb (1,352 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
What hitch category is the Kubota M4950?
This row does not show a clean hitch category for the Kubota M4950. Check the operator manual or official spec sheet before buying implements, because lift capacity alone does not guarantee fit.
How should I match rear implements to the Kubota M4950?
Start with 2,980 lb (1,352 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Do hydraulic flow and weight matter for the Kubota M4950?
Yes. The Kubota M4950 lists hydraulic pump flow of 9.5 gpm (36 L/min) and operating weight of 5,800 lb (2,631 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
