The Kubota M4050 has a 3-point hitch lift capacity of 2,200 lb (998 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 / Category 2, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 4,600 lb (2,087 kg).
Best rear lift figure2,200 lb (998 kg)
Lift at 24 inches2,200 lb (998 kg)
Hitch categoryCategory 1 / Category 2
Operating weight4,600 lb (2,087 kg)
Kubota M4050 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,200 lb (998 kg)
Lift capacity at 24 inches behind link ends
2,200 lb (998 kg)
Hitch category
Category 1 / Category 2
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
4,600 lb (2,087 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
4,600 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota M4050 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota M4050 is 2,200 lb (998 kg) (lift at 24 inches behind the link ends). In plain terms, it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments
24-inch lift note
For the Kubota M4050, the 2,200 lb (998 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
For hydraulic context, the Kubota M4050 is listed at 8.2 gpm (31 L/min). Do not confuse pump flow with lift capacity; they answer different questions
Operating weight note
Weight matters with rear implements. The Kubota M4050’s captured operating weight is 4,600 lb (2,087 kg), which affects ballast, traction and stability
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota M4050’s lift capacity against gear like rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota M4050 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota M4050?
Rear lift capacity for the Kubota M4050 is shown as 2,200 lb (998 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota M4050 is listed at 2,200 lb (998 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota M4050?
Yes. The Kubota M4050 is listed as Category 1 / Category 2, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota M4050?
Start with 2,200 lb (998 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Do hydraulic flow and weight matter for the Kubota M4050?
Yes. The Kubota M4050 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 4,600 lb (2,087 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
