The Kubota M4030 has a 3-point hitch lift capacity of 1,800 lb (816 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 and hydraulic pump flow 11 gpm (41.6 L/min).
Best rear lift figure1,800 lb (816 kg)
Lift at 24 inches1,800 lb (816 kg)
Hitch categoryCategory 1
Kubota M4030 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,200 lb (998 kg)
Lift capacity at 24 inches behind link ends
1,800 lb (816 kg)
Hitch category
Category 1
Hydraulic pump flow
11 gpm (41.6 L/min)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
1,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
11 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Kubota M4030 Hitch and Rear Lift Notes
24-inch lift note
The Kubota M4030’s 1,800 lb (816 kg) lift rating at 24 inches behind the link ends is the better real-world number for mounted implements than a bare hitch-end rating
Hitch category note
Hitch category on the Kubota M4030 is Category 1. That is one of the first checks before buying a rear blade, tiller, mower or ballast box
Hydraulic flow note
Hydraulic pump flow is listed as 11 gpm (41.6 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Rear implement matching
For the Kubota M4030, compare 1,800 lb (816 kg) with real implement weight. Common rear-implement checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota M4030 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota M4030?
Rear lift capacity for the Kubota M4030 is shown as 1,800 lb (816 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota M4030 is listed at 1,800 lb (816 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota M4030?
Yes. The Kubota M4030 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota M4030?
Start with 1,800 lb (816 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Does hydraulic pump flow matter for the Kubota M4030?
Yes, but it is not the same as lift capacity. The Kubota M4030 is listed at 11 gpm (41.6 L/min) hydraulic pump flow, while the rear lift number tells you what the hitch can raise.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
