The Kubota M126GX has a 3-point hitch lift capacity of 11,464 lb (5,200 kg) at 24 inches behind the link ends. It also lists hitch category Category 2, hydraulic pump flow 20.4 gpm (77.2 L/min), and operating weight 10,373 lb (4,705 kg).
Best rear lift figure11,464 lb (5,200 kg)
Lift at 24 inches11,464 lb (5,200 kg)
Hitch categoryCategory 2
Operating weight10,373 lb (4,705 kg)
Kubota M126GX 3-Point Hitch Lift Capacity
3-point hitch lift capacity
11,464 lb (5,200 kg)
Lift capacity at 24 inches behind link ends
11,464 lb (5,200 kg)
Hitch category
Category 2
Hydraulic pump flow
20.4 gpm (77.2 L/min)
Operating weight
10,373 lb (4,705 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
11,464 lb
Average
9,000 lb
Low
5,000 lb
High
15,000 lb
Lift at 24 inches comparison
This model
11,464 lb
Average
9,000 lb
Low
5,000 lb
High
15,000 lb
Hydraulic pump flow comparison
This model
20.4 gpm
Average
25 gpm
Low
14 gpm
High
40 gpm
Operating weight comparison
This model
10,373 lb
Average
10,000 lb
Low
6,000 lb
High
16,000 lb
Kubota M126GX Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota M126GX rear hitch spec points to 11,464 lb (5,200 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota M126GX, start with Category 2, then check lift capacity and tractor stability
Hydraulic flow note
The Kubota M126GX’s captured hydraulic pump flow is 20.4 gpm (77.2 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota M126GX operating weight is listed as 10,373 lb (4,705 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
The practical reason to check rear lift on the Kubota M126GX is implement fit. Think large mounted implements, heavy tillage tools, big mower, large planter, and heavy ballast setup, then compare actual implement weight
Kubota M126GX 3-Point Hitch FAQ
How much can the Kubota M126GX rear 3-point hitch lift?
The main rear-lift number captured for the Kubota M126GX is 11,464 lb (5,200 kg). Use that as the first-pass number for rear implements, not as a front-loader rating.
Why does the 24-inch rear lift spec matter?
The 11,464 lb (5,200 kg) rating matters because mounted implements put weight behind the lift arms. That extra distance makes the tractor work harder than a close-in hitch-end test.
What hitch category is the Kubota M126GX?
The listed hitch category for the Kubota M126GX is Category 2. Match implement pins and hitch width to that category before worrying about lift capacity.
Can the Kubota M126GX handle heavy rear attachments?
The Kubota M126GX’s useful lift reference is 11,464 lb (5,200 kg). It may suit large mounted implements, heavy tillage tools, big mower, large planter, and heavy ballast setup, but capacity is strong, but implement length, ballast, axle load and field conditions still matter.
Do hydraulic flow and weight matter for the Kubota M126GX?
Yes. The Kubota M126GX lists hydraulic pump flow of 20.4 gpm (77.2 L/min) and operating weight of 10,373 lb (4,705 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
