The Kubota M110A coolant capacity is listed as 3.3 gal (12.5 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible.
Kubota M110A Coolant Capacity
| Coolant capacity | 3.2 gal (12.1 L) |
|---|---|
| Cooling system capacity | 3.3 gal (12.5 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Engine model | V3800-TI |
| Engine horsepower | 108.5 hp (80.9 kW) |
| Engine displacement | 3.8 L (231.9 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota M110A Coolant and Engine Notes
| Coolant capacity note | The headline cooling-system number for the Kubota M110A is 3.3 gal (12.5 L). Buy enough coolant before opening the drain plug |
|---|---|
| Coolant type note | The captured coolant type for the Kubota M110A is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Engine context note | The Kubota M110A engine data captured here is engine model V3800-TI, engine horsepower 108.5 hp (80.9 kW), and displacement 3.8 L (231.9 cu in). Bigger engines usually need more coolant and more careful refill bleeding |
| Refill note | For a coolant change on the Kubota M110A, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota M110A Coolant Capacity FAQ
How much coolant does the Kubota M110A take?
The main coolant amount captured for the Kubota M110A is 3.3 gal (12.5 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota M110A?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota M110A, the captured coolant type is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible.
What antifreeze mix does the Kubota M110A use?
The captured antifreeze mix for the Kubota M110A is the coolant mix specified in the manual. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota M110A coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Kubota M110A coolant capacity?
The captured engine context is engine model V3800-TI, horsepower 108.5 hp (80.9 kW), and displacement 3.8 L (231.9 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
