The Kubota M10570 coolant capacity is listed as 3.3 gal (12.5 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Coolant capacity3.3 gal (12.5 L)
Coolant typeethylene glycol-based coolant and ASTM D3306 compatible
Antifreeze mix50/50 coolant and water mix
Kubota M10570 Coolant Capacity
Cooling system capacity
3.3 gal (12.5 L)
Coolant type
ethylene glycol-based coolant and ASTM D3306 compatible
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
105 hp (78.3 kW)
Engine displacement
5.4 L (330.3 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
3.3 gal
Average
4 gal
Low
2 gal
High
8 gal
Engine horsepower comparison
This model
105 hp
Average
140 hp
Low
80 hp
High
240 hp
Engine displacement comparison
This model
5.4 L
Average
6 L
Low
3 L
High
10 L
Kubota M10570 Coolant and Engine Notes
Coolant capacity note
For the Kubota M10570, 3.3 gal (12.5 L) is the main coolant capacity captured. Use it as a refill planning number, then confirm the final level at the machine
Coolant type note
Use the right coolant formula for the Kubota M10570: ethylene glycol-based coolant and ASTM D3306 compatible. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits
Antifreeze mix note
The 50/50 coolant and water mix mix gives the Kubota M10570 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note
The Kubota M10570 engine data captured here is engine horsepower 105 hp (78.3 kW) and displacement 5.4 L (330.3 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
Coolant changes are simple but easy to do sloppily. On the Kubota M10570, plan around 3.3 gal (12.5 L) and confirm the final level after air works out of the system
Kubota M10570 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota M10570?
The Kubota M10570 cooling system capacity is shown as 3.3 gal (12.5 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota M10570?
Use ethylene glycol-based coolant and ASTM D3306 compatible. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota M10570?
Not for normal long-term use. The Kubota M10570 should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota M10570?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota M10570 is the service interval in the operator manual.
Why does the Kubota M10570 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota M10570, the supporting engine data is horsepower 105 hp (78.3 kW) and displacement 5.4 L (330.3 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
