The Kubota KL46 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Kubota KL46 Coolant Capacity
| Coolant capacity | 2.17 gal (8.2 L) |
|---|---|
| Radiator capacity | 2.17 gal (8.2 L) |
| Coolant type | ethylene glycol-based coolant |
| Antifreeze mix | 50/50 coolant and water mix |
| Coolant change interval | every 2 years |
| Engine horsepower | 45.3 hp (33.8 kW) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Kubota KL46 Coolant and Engine Notes
| Coolant capacity note | For service planning, the Kubota KL46 should be treated as 2.17 gal (8.2 L) coolant capacity. That is a compact tractor cooling system where a normal premixed coolant jug may cover most of the refill |
|---|---|
| Radiator capacity note | For the Kubota KL46, the captured radiator capacity is 2.17 gal (8.2 L). If you are doing a full drain, check the full cooling-system capacity too |
| Coolant type note | For the Kubota KL46, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant |
| Antifreeze mix note | For the Kubota KL46, the captured mix is 50/50 coolant and water mix. Straight water is not the right long-term answer unless you are only flushing the system |
| Coolant change interval note | Coolant service for the Kubota KL46 is listed as every 2 years. If the service history is unknown, a fresh drain and refill is usually the cleaner move |
| Engine context note | Engine context for the Kubota KL46: engine horsepower 45.3 hp (33.8 kW). Engine size helps explain why coolant capacity changes between models |
| Refill note | The practical service move for the Kubota KL46: buy enough coolant for 2.17 gal (8.2 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota KL46 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota KL46?
The Kubota KL46 cooling system capacity is shown as 2.17 gal (8.2 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota KL46?
Use ethylene glycol-based coolant. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota KL46?
Not for normal long-term use. The Kubota KL46 should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota KL46?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota KL46 is every 2 years.
What engine specs affect Kubota KL46 coolant capacity?
The captured engine context is horsepower 45.3 hp (33.8 kW). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
