The Kubota GL368 has a 3-point hitch lift capacity of 1,500 lb (680 kg) at 24 inches behind the link ends. It also lists hydraulic pump flow 8.2 gpm (31 L/min) and operating weight 3,616 lb (1,640 kg).
Best rear lift figure1,500 lb (680 kg)
Lift at 24 inches1,500 lb (680 kg)
Operating weight3,616 lb (1,640 kg)
Kubota GL368 3-Point Hitch Lift Capacity
Lift capacity at 24 inches behind link ends
1,500 lb (680 kg)
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
3,616 lb (1,640 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
3,616 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota GL368 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota GL368 is 1,500 lb (680 kg) (lift at 24 inches behind the link ends). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
24-inch lift note
For the Kubota GL368, the 1,500 lb (680 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
Hydraulic pump flow is listed as 8.2 gpm (31 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Operating weight note
For the Kubota GL368, operating weight is 3,616 lb (1,640 kg). Use that beside rear lift capacity before hanging a heavy implement out the back
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota GL368’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota GL368 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota GL368?
Rear lift capacity for the Kubota GL368 is shown as 1,500 lb (680 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota GL368 is listed at 1,500 lb (680 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
What hitch category is the Kubota GL368?
This row does not show a clean hitch category for the Kubota GL368. Check the operator manual or official spec sheet before buying implements, because lift capacity alone does not guarantee fit.
How should I match rear implements to the Kubota GL368?
Start with 1,500 lb (680 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota GL368?
Yes. The Kubota GL368 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 3,616 lb (1,640 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
