Weight summary
The published Massey Ferguson 3050 weight is 7,529–9,165 lb (3,415–4,157 kg). The primary figure used for comparisons is 7,529 lb (3,415 kg), listed as 2WD ROPS. The published configurations span 1,636 lb, a 21.7% difference from the lightest listed setup.
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Light
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Massey Ferguson |
|---|---|
| Model | 3050 |
| Category | Farm tractor |
| Model years | 1986 – 1990 |
| Tractor type | Row-Crop Tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| 2WD ROPS | — | 7,529 lb | 3,415 kg | 3.76 | — |
| 2WD Cab | — | 8,558 lb | 3,881 kg | 4.28 | — |
| 4WD ROPS | — | 8,135 lb | 3,690 kg | 4.07 | — |
| 4WD Cab | — | 9,165 lb | 4,157 kg | 4.58 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Massey Ferguson 3060 (7529 lb)
- New Holland TS6.110 (7524 lb)
- New Holland TS6.120 (7524 lb)
- New Holland TS6.125 (7524 lb)
- New Holland TS6.140 (7524 lb)
Closest comparable tractors
- Ford 6000 (7405 lb, 66.9 hp)
- John Deere 3020 (7695 lb, 70 hp)
- Allis Chalmers 6070 (7285 lb, 70.78 hp)
- Massey Ferguson 3060 (7529 lb, 77 hp)
- Farmall 656 (7230 lb, 63.8 hp)
Massey Ferguson 3050 weight FAQ
How much does a Massey Ferguson 3050 weigh?
The Massey Ferguson 3050 weighs 7,529 lb (3,415 kg) using the published 2WD ROPS figure. Across the published configurations on this page, weight ranges from 7,529 to 9,165 lb (3,415 to 4,157 kg).
How much heavier is the 4WD Massey Ferguson 3050 than the 2WD model?
Published 2WD weight is 7,529–8,558 lb (3,415–3,882 kg), while published 4WD weight is 8,135–9,165 lb (3,690–4,157 kg). On a midpoint basis, the published 4WD configurations are about 606 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the Massey Ferguson 3050 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 19th percentile, lighter than roughly 81% of the row-crop tractor peers. That puts it in the light range for this comparison. It is 6,477 lb lighter than the peer-group average of 14,006 lb.
How wide is the Massey Ferguson 3050 for transport?
The maximum published tractor width is 72.1 in (6 ft). That is 29.9 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Massey Ferguson 3050 weight-to-horsepower ratio?
Using the page’s representative 7,529 lb weight and 68 hp power figure, the tractor carries about 110.7 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Massey Ferguson 3050 weigh?
The representative published weight is about 3.76 US tons, while the full published range is 3.76–4.58 US tons. Loaded transport weight can be higher than the tractor specification.
