The Komatsu PC170LC-11E0 crawler excavator produced in 2021-2026, is listed with an operating weight of 40,080 lb (18.2 t), engine power of 121 hp (90 kW), a bucket capacity of 1.24 yd³ (0.95 m³) and a maximum digging depth of 18.4 ft (5.61 m).
Crawler Excavator • 2021-2026 • SAA4D107E-5
Key specifications
Useful excavator charts
Charts appear only when enough usable specifications are available.
18.4 ft
28.5 ft
28.5 ft
8.5 ft
10.2 ft
How the Komatsu PC170LC-11E0 compares
Comparison is against Komatsu crawler excavators in the same broad operating-weight class where enough comparable data exists.
About 16% above the peer average.
In line with the peer average.
About 5% below the peer average.
In line with the peer average.
About 44% above the peer average.
Crawler excavator information
| Manufacturer | Komatsu |
|---|---|
| Model | PC170LC-11E0 |
| Years of manufacture | 2021-2026 |
| Model series | PC |
| Undercarriage | LC |
| Boom | MB |
Operating specifications
| Operating weight | 40,080 lb (18.2 t) |
|---|---|
| Bucket capacity | 1.24 yd³ (0.95 m³) |
| Bucket width | 3.5 ft (1.07 m) |
| Maximum digging depth | 18.4 ft (5.61 m) |
| Maximum horizontal reach | 28.5 ft (8.68 m) |
| Tear-out force | 27,651 lbf (123 kN) |
Engine and emissions
| Engine manufacturer | Komatsu |
|---|---|
| Engine model | SAA4D107E-5 |
| Engine power | 121 hp (90 kW) |
| Displacement | 272 cu in (4.5 L) |
| Cylinders | 4 |
| Cylinder bore × stroke | 4.21 × 4.88 in (107 × 124 mm) |
| RPM at maximum torque | 2100 rpm |
| Emission level | V |
| Diesel particulate filter | Yes |
Dimensions and transport
| Transport length | 28.5 ft (8.69 m) |
|---|---|
| Transport width | 8.5 ft (2.59 m) |
| Transport height | 10.2 ft (3.11 m) |
| Track width | 19.7 in (500 mm) |
Equipment and features
| Air conditioning | No |
|---|---|
| Blade | No |
| Cabin adjustment | No |
| Material handling excavator | No |
| Overload alert | Yes |
| Hydraulic quick hitch | No |
| Mechanical quick hitch | No |
| Track adjustment | No |
Disclaimer: Specifications should be verified against the official machine documentation and confirmed on the Komatsu USA website.

