The blade set part number found is M170476. The blade measurement captured is width 2.48 in (63 mm) and thickness 0.188 in (5 mm).
Blade set part #M170476
Blade sizewidth 2.48 in (63 mm) and thickness 0.188 in (5 mm)
John Deere X710 Mower Blade Size and Part Numbers
Mower blade set part number
M170476
Blade width
2.48 in (63 mm)
Blade thickness
0.188 in (5 mm)
Blade type
high-lift and mulching
Blade Size Comparison Chart
Blade width comparison
This model
2.48 in
Average
2.5 in
Low
2 in
High
3.5 in
Blade thickness comparison
This model
0.188 in
Average
0.188 in
Low
0.125 in
High
0.25 in
John Deere X710 Blade Notes
Blade note
The John Deere X710 blade listing captured here shows blade set part number M170476 and width 2.48 in (63 mm) and thickness 0.188 in (5 mm). Do not buy purely from model name if the mower deck or serial range is different
Blade type note
For the John Deere X710, blade type is listed as high-lift and mulching. Pick the blade style for the job: clean discharge, bagging lift, or mulching
Fitment note
For the John Deere X710, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering
John Deere X710 Mower Blade FAQ
Should you buy John Deere X710 blades by length only?
No. The blade width found is 2.48 in (63 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. Use length, width, center hole and OEM part number together where possible
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
