John Deere Construction 8875 John Deere Construction Battery Size (750 CCA)

The John Deere Construction 8875 John Deere Construction skid-steer battery size should be verified for the specific machine, and it uses a 12-volt electrical system. Its 750 CCA rating is average for John Deere skid-steers in this dataset.

ModelConstruction 8875 John Deere Construction
BrandJohn Deere
Voltage12 V
EquipmentSkid Steer

Voltage
12 V
Cold cranking
750 CCA
Battery size
Check physical fitment
Battery location
See details below

How this battery compares

Compared with other John Deere skid-steer battery ratings in this dataset.

Cold cranking amps750 CCA
Average
LowAverageHigh
Low 460 CCAMedian 800 CCAHigh 950 CCA

BA

Battery specification

Model-specific replacement data

System voltage
12 V
Battery group size
Check physical fitment
Cold cranking amps
750 CCA
RP

Replacement battery

What to match when buying

The best replacement battery for the John Deere 8875 Skid Steer Loader is the AJC-U1-24M-202538, which is a sealed lead acid (AGM) battery designed for reliable performance. Always verify compatibility with your specific model before purchasing.

LC

Battery location

Where the battery is mounted

The battery on the John Deere 8875 Skid Steer Loader is located on the left side of the machine, near the engine compartment. For replacement, it's important to consult the manual for specific instructions and ensure you use a compatible battery.

ID

Model details

Equipment identity

Brand
John Deere
Model
Construction 8875 John Deere Construction
Equipment class
Skid-Steer Loader
HOW

How to replace the battery

Basic replacement procedure

Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.

!

Bad battery symptoms

Signs the battery may be failing

Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.

?

What battery size fits the John Deere Construction 8875 John Deere Construction?

Quick answer

The John Deere 8875 Skid Steer Loader uses a battery with a group size of 4D.

?

How many CCA does the John Deere Construction 8875 John Deere Construction need?

Quick answer

The recommended battery for the John Deere 8875 Skid Steer Loader typically has a Cold Cranking Amps (CCA) rating of 750. For specific replacement options, it's best to consult your local John Deere dealer for the most accurate and compatible battery specifications.

?

What voltage battery does the John Deere Construction 8875 John Deere Construction use?

Quick answer

The operating voltage for the John Deere 8875 Skid Steer Loader is 12 volts. For battery replacement, it's important to ensure compatibility with this voltage specification.

?

Where is the battery on the John Deere Construction 8875 John Deere Construction?

Quick answer

The battery on the John Deere 8875 Skid Steer Loader is located on the left side of the machine, near the engine compartment. For replacement, it's important to consult the manual for specific instructions and ensure you use a compatible battery.

?

What is the best replacement battery for the John Deere Construction 8875 John Deere Construction?

Quick answer

The best replacement battery for the John Deere 8875 Skid Steer Loader is the AJC-U1-24M-202538, which is a sealed lead acid (AGM) battery designed for reliable performance. Always verify compatibility with your specific model before purchasing.

Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the John Deere website for manufacturer information.