The John Deere Construction 4475 John Deere Construction skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 950 CCA rating is high for John Deere skid-steers in this dataset.
ModelConstruction 4475 John Deere Construction
BrandJohn Deere
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
950 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other John Deere skid-steer battery ratings in this dataset.
Cold cranking amps950 CCA
High
LowAverageHigh
Low 460 CCAMedian 800 CCAHigh 950 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
950 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on a John Deere Construction 4475 skid steer loader is located under the left side engine panel, and the maintenance-free battery is standard on this model.
ID
Model details
Equipment identity
Brand
John Deere
Model
Construction 4475 John Deere Construction
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a John Deere 4475 Skid Steer Loader include the engine not starting, slow cranking, and battery discharge indicator lights remaining on while the engine is running. For replacement, it's essential to check the battery terminals for corrosion and ensure proper connections.
?
What battery size fits the John Deere Construction 4475 John Deere Construction?
Quick answer
?
How many CCA does the John Deere Construction 4475 John Deere Construction need?
Quick answer
950 CCA. Best available fitment is based on closest same-brand/model-family match (Construction 270 John Deere Construction); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.
?
What voltage battery does the John Deere Construction 4475 John Deere Construction use?
Quick answer
The official battery voltage for the John Deere 4475 Skid Steer Loader is 12 volts. For replacement options, it's best to consult your local John Deere dealer or authorized parts supplier.
?
Where is the battery on the John Deere Construction 4475 John Deere Construction?
Quick answer
The battery on a John Deere Construction 4475 skid steer loader is located under the left side engine panel, and the maintenance-free battery is standard on this model.
?
What is the best replacement battery for the John Deere Construction 4475 John Deere Construction?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the John Deere website for manufacturer information.
