The John Deere 8560 tractor hydraulic pump flow is 44.8 GPM, and hydraulic system pressure is 1,500 psi.
Hydraulic pump flow44.8 GPM
Implement flow44.8 GPM
Total hydraulic flow44.8 GPM
Hydraulic pressure1,500 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity30 gal
John Deere 8560 Hydraulic Flow Details
Hydraulic pump flow
44.8 GPM
Implement hydraulic flow
44.8 GPM
Total hydraulic flow
44.8 GPM
Hydraulic system pressure
1,500 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
30 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
44.8 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
44.8 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
44.8 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
1,500 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
30 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere 8560 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 8560’s implement flow figure is about 44.8 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere 8560’s hydraulic pressure is listed at 1,500 psi, which is lower-pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (44.8 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 8560’s hydraulic system type is closed-center pressure-flow compensated, which is more advanced and better suited to variable hydraulic demand.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 8560 is 30 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
