The John Deere 6M 180 tractor hydraulic pump flow is 30 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow30 GPM
Implement flow30 GPM
Total hydraulic flow30 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity30 gal
John Deere 6M 180 Hydraulic Flow Details
Hydraulic pump flow
30 GPM
Implement hydraulic flow
30 GPM
Total hydraulic flow
30 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
30 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
30 GPM
Average
37.8 GPM
Low
3.3 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
30 GPM
Average
37.9 GPM
Low
3.3 GPM
High
110 GPM
Total hydraulic flow comparison
This model
30 GPM
Average
38.2 GPM
Low
3.3 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,672.7 psi
Low
610 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
30 gal
Average
28.5 gal
Low
0.9 gal
High
84 gal
John Deere 6M 180 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 6M 180 is 30 GPM implement flow; that points toward multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
The John Deere 6M 180’s hydraulic pressure is listed at 2,900 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (30 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 6M 180: closed-center pressure-flow compensated affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 6M 180 is 30 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
