The John Deere 4120 tractor weighs 3,700 lb (1,678 kg) using its primary published weight. Other useful published figures are 1,103 lb (Max Drawbar). That places it around the 40th percentile among comparable utility tractors, on the lighter side of its peer group.
The published John Deere 4120 weight is 1,103–3,700 lb (500–1,678 kg). The primary figure used for comparisons is 3,700 lb (1,678 kg), listed as Weight. The published configurations span 2,597 lb, a 235.4% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Average
3,700 lb
Low1,537 lb
This model3,700 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight1,103–3,700 lb (500–1,678 kg)
Overall weight bandMidweight
Tractor typeUtility Tractor
Primary horsepower43.1 hp / 32.1 kW
Max length128.2 in (325 cm)
Max width65.6 in (166 cm)
Overview
Model information
Manufacturer
John Deere
Model
4120
Category
Farm tractor
Model years
2004 – 2014
Tractor type
Utility Tractor
Published weight variants
2
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
3,700 lb
1,678 kg
1.85
—
Max Drawbar
—
1,103 lb
500 kg
0.55
—
Configuration effect
How configuration changes the weight
2,597 lbLightest to heaviest · 235.4% spread across published variants
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase71.5 in (181 cm)
Length128.2 in (325 cm)
Width65.6 in (166 cm)
Height97.2 in (246 cm)
Power & weight ratios
Primary power43.1 hp (32.1 kW)
Power basisEngine
Weight per horsepower85.8 lb/hp
Weight per foot of length346.3 lb/ft
Wheelbase / length55.8%
Transport snapshot
Primary published weight3,700 lb (1,678 kg)
Maximum published weight3,700 lb (1,678 kg)
Maximum US-ton equivalent1.85 US tons
Maximum published width65.6 in (166 cm)
Published width over 102 inNo
Weight context
Weight range1,103–3,700 lb (500–1,678 kg)
Primary weight basisWeight
Peer positionAverage among Utility Tractor peers · 40th percentile
Physical size classBelow-average size
For transport planning, the representative published tractor weight is about 3,700 lb (1.85 US tons); published configurations reach 3,700 lb (1.85 US tons); the widest published tractor dimension is 65.6 in (5.5 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Massey Ferguson 1648 (3715 lb)
Kubota MX4900 (3716 lb)
Case IH Farmall 40B (3725 lb)
Massey Ferguson 145V (3731 lb)
Kubota MX5800 (3734 lb)
Closest comparable tractors
Ford 2110 (3635 lb)
Kubota L4060 (3737 lb, 42 hp)
John Deere 4044M (3770 lb, 42.5 hp)
John Deere 4044R (3770 lb, 42.5 hp)
Massey Ferguson 42 (3638 lb, 42 hp)
Common questions
John Deere 4120 weight FAQ
How much does a John Deere 4120 weigh?
The John Deere 4120 weighs 3,700 lb (1,678 kg) using the primary published weight figure. Across the published configurations on this page, weight ranges from 1,103 to 3,700 lb (500 to 1,678 kg).
Is the John Deere 4120 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 40th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 1,563 lb lighter than the peer-group average of 5,263 lb.
How wide is the John Deere 4120 for transport?
The maximum published tractor width is 65.6 in (5.5 ft). That is 36.4 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the John Deere 4120 weight-to-horsepower ratio?
Using the page’s representative 3,700 lb weight and 43.1 hp power figure, the tractor carries about 85.8 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the John Deere 4120 weigh?
The representative published weight is about 1.85 US tons, while the full published range is 0.55–1.85 US tons. Loaded transport weight can be higher than the tractor specification.
