The John Deere 1040 tractor weighs 6,107 lb (2,770 kg) using its primary published weight. That places it around the 66th percentile among comparable utility tractors, on the heavier side of its peer group. Its widest published dimension is 71.3 in (5.9 ft).
The published John Deere 1040 weight is 6,107 lb (2,770 kg). The primary figure used for comparisons is 6,107 lb (2,770 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Average
6,107 lb
Low1,537 lb
This model6,107 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight6,107 lb (2,770 kg)
Overall weight bandHeavy
Tractor typeUtility Tractor
Physical sizeMid-size
Max length138 in (350 cm)
Max width71.3 in (181 cm)
Overview
Model information
Manufacturer
John Deere
Model
1040
Category
Farm tractor
Model years
1980 – 1987
Tractor type
Utility Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
6,107 lb
2,770 kg
3.05
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase80.7 in (204 cm)
Length138 in (350 cm)
Width71.3 in (181 cm)
Height96.1 in (244 cm)
Power & weight ratios
Weight per foot of length531 lb/ft
Wheelbase / length58.5%
Transport snapshot
Primary published weight6,107 lb (2,770 kg)
Maximum published weight6,107 lb (2,770 kg)
Maximum US-ton equivalent3.05 US tons
Maximum published width71.3 in (181 cm)
Published width over 102 inNo
Weight context
Weight range6,107 lb (2,770 kg)
Primary weight basisWeight
Peer positionAverage among Utility Tractor peers · 66th percentile
Physical size classMid-size
For transport planning, the representative published tractor weight is about 6,107 lb (3.05 US tons); published configurations reach 6,107 lb (3.05 US tons); the widest published tractor dimension is 71.3 in (5.9 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Case IH Farmall 95 (6107 lb)
New Holland TD95D (6107 lb)
Massey Ferguson 383 (6098 lb)
Mahindra 6065 (6096 lb)
New Holland T4030F (6089 lb)
Closest comparable tractors
Case IH Farmall 95 (6107 lb, 90 hp)
New Holland TD95D (6107 lb, 90 hp)
Massey Ferguson 383 (6098 lb, 76 hp)
Mahindra 6065 (6096 lb, 62 hp)
Case IH JX1070C (6085 lb, 70 hp)
Common questions
John Deere 1040 weight FAQ
How much does a John Deere 1040 weigh?
The John Deere 1040 weighs 6,107 lb (2,770 kg) using the primary published weight figure.
Is the John Deere 1040 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 66th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 844 lb heavier than the peer-group average of 5,263 lb.
How wide is the John Deere 1040 for transport?
The maximum published tractor width is 71.3 in (5.9 ft). That is 30.7 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
How many tons does the John Deere 1040 weigh?
The representative published weight is about 3.05 US tons, while the full published range is 3.05 US tons. Loaded transport weight can be higher than the tractor specification.
