The J.I. Case 1090 tractor weighs 10,400 lb (4,717 kg) using its primary published weight. That places it around the 30th percentile among comparable row-crop tractors, on the lighter side of its peer group. With 110 hp, the tractor carries about 94.5 lb of published weight per horsepower.
The published J.I. Case 1090 weight is 10,400 lb (4,717 kg). The primary figure used for comparisons is 10,400 lb (4,717 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Representative published weight
Light
10,400 lb
Low5,300 lb
This model10,400 lb
Average14,006 lb
High23,810 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight10,400 lb (4,717 kg)
Overall weight bandHeavy
Tractor typeRow-Crop Tractor
Primary horsepower110 hp / 82 kW
Weight per hp94.5 lb/hp
Published variants1
Overview
Model information
Manufacturer
J.I. Case
Model
1090
Category
Farm tractor
Model years
2000 – 2024
Tractor type
Row-Crop Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
10,400 lb
4,717 kg
5.2
—
Dimensions, power & hauling
Technical details
Dimensions
DimensionsNot published
Power & weight ratios
Primary power110 hp (82 kW)
Power basisPTO (claimed)
Weight per horsepower94.5 lb/hp
Transport snapshot
Primary published weight10,400 lb (4,717 kg)
Maximum published weight10,400 lb (4,717 kg)
Maximum US-ton equivalent5.2 US tons
Weight context
Weight range10,400 lb (4,717 kg)
Primary weight basisWeight
Peer positionLight among Row-Crop Tractor peers · 30th percentile
Physical size classNot enough dimension data
For transport planning, the representative published tractor weight is about 10,400 lb (5.2 US tons); published configurations reach 10,400 lb (5.2 US tons). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Farmall 1256 (10405 lb)
International Harvester 1256 (10405 lb)
Kubota M126GX (10373 lb)
Kubota M135GX (10373 lb)
New Holland TS115 (10449 lb)
Closest comparable tractors
Ford 8401 (10472 lb, 109.25 hp)
John Deere 6600 (10250 lb, 110 hp)
Case IH Maxxum 110 (10240 lb, 110 hp)
Massey Ferguson 1114 (10694 lb, 110 hp)
John Deere 6506 (10250 lb, 105 hp)
Common questions
J.I. Case 1090 weight FAQ
How much does a J.I. Case 1090 weigh?
The J.I. Case 1090 weighs 10,400 lb (4,717 kg) using the primary published weight figure.
Is the J.I. Case 1090 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 30th percentile, lighter than roughly 70% of the row-crop tractor peers. That puts it in the light range for this comparison. It is 3,606 lb lighter than the peer-group average of 14,006 lb.
Does the J.I. Case 1090 weigh more than 10,000 lb?
Yes. The representative published weight is 10,400 lb, and the heaviest published configuration on this page is 10,400 lb (5.2 US tons). Any trailer calculation also needs the trailer itself plus fuel, ballast, attachments and other equipment.
What is the J.I. Case 1090 weight-to-horsepower ratio?
Using the page’s representative 10,400 lb weight and 110 hp power figure, the tractor carries about 94.5 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the J.I. Case 1090 weigh?
The representative published weight is about 5.2 US tons, while the full published range is 5.2 US tons. Loaded transport weight can be higher than the tractor specification.
