The International Harvester D-436 tractor weighs 3,142 lb (1,425 kg) using its primary published weight. That places it around the 33rd percentile among comparable utility tractors, on the lighter side of its peer group. With 39 hp, the tractor carries about 80.6 lb of published weight per horsepower.
Tractor weight specifications
International Harvester · D-436 · Tractor weight guide
The published International Harvester D-436 weight is 3,142 lb (1,425 kg). The primary figure used for comparisons is 3,142 lb (1,425 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Average
3,142 lb
Low1,537 lb
This model3,142 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight3,142 lb (1,425 kg)
Overall weight bandMidweight
Tractor typeUtility Tractor
Primary horsepower39 hp / 29.1 kW
Max length115.25 in (292 cm)
Max width64.5 in (163 cm)
Overview
Model information
Manufacturer
International Harvester
Model
D-436
Category
Farm tractor
Model years
1959 – 1962
Tractor type
Utility Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
3,142 lb
1,425 kg
1.57
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase74 in (187 cm)
Length115.25 in (292 cm)
Width64.5 in (163 cm)
Height61 in (154 cm)
Power & weight ratios
Primary power39 hp (29.1 kW)
Power basisEngine (gross)
Weight per horsepower80.6 lb/hp
Weight per foot of length327.1 lb/ft
Wheelbase / length64.2%
Transport snapshot
Primary published weight3,142 lb (1,425 kg)
Maximum published weight3,142 lb (1,425 kg)
Maximum US-ton equivalent1.57 US tons
Maximum published width64.5 in (163 cm)
Published width over 102 inNo
Weight context
Weight range3,142 lb (1,425 kg)
Primary weight basisWeight
Peer positionAverage among Utility Tractor peers · 33rd percentile
Physical size classBelow-average size
For transport planning, the representative published tractor weight is about 3,142 lb (1.57 US tons); published configurations reach 3,142 lb (1.57 US tons); the widest published tractor dimension is 64.5 in (5.4 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Kubota L305 (3140 lb)
J.I. Case 410-B (3135 lb)
Allis Chalmers FD3 (3150 lb)
Kubota L3240 (3153 lb)
Yanmar AF-33 (3153 lb)
Closest comparable tractors
Mahindra 1538 (3186 lb, 38.7 hp)
Mahindra 1640 (3186 lb, 38.7 hp)
Case IH Farmall 35A Series II (3067 lb)
Case IH Farmall 40A Series II (3067 lb)
J.I. Case 410-B (3135 lb, 37 hp)
Common questions
International Harvester D-436 weight FAQ
How much does an International Harvester D-436 weigh?
The International Harvester D-436 weighs 3,142 lb (1,425 kg) using the primary published weight figure.
Is the International Harvester D-436 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 33rd percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 2,121 lb lighter than the peer-group average of 5,263 lb.
How wide is the International Harvester D-436 for transport?
The maximum published tractor width is 64.5 in (5.4 ft). That is 37.5 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the International Harvester D-436 weight-to-horsepower ratio?
Using the page’s representative 3,142 lb weight and 39 hp power figure, the tractor carries about 80.6 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the International Harvester D-436 weigh?
The representative published weight is about 1.57 US tons, while the full published range is 1.57 US tons. Loaded transport weight can be higher than the tractor specification.
