The Gehl V276 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 800 CCA rating is average for Gehl skid-steers in this dataset.
ModelV276
BrandGehl
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
800 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Gehl skid-steer battery ratings in this dataset.
Cold cranking amps800 CCA
Average
LowAverageHigh
Low 105 CCAMedian 800 CCAHigh 950 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
800 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for the Gehl V276 skid steer loader is typically a 12-volt battery with 950 cold cranking amps (CCA), often a group 31 battery. It's advisable to check the specific requirements in the owner's manual or consult a dealer for the most suitable options.
LC
Battery location
Where the battery is mounted
The battery on the Gehl V276 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or contact your local Gehl dealer. manuals.plus
ID
Model details
Equipment identity
Brand
Gehl
Model
V276
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Gehl V276 skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Gehl V276?
Quick answer
The official battery group size for the Gehl V276 skid steer loader is Group 31. For replacement, it's important to ensure the battery meets the specifications required for optimal performance.
?
How many CCA does the Gehl V276 need?
Quick answer
The recommended battery for the Gehl V276 skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 650 to 800 CCA. It's important to check with your local Gehl dealer for the exact specifications and compatible replacement options.
?
What voltage battery does the Gehl V276 use?
Quick answer
The Gehl V276 skid steer loader uses a 12-volt battery. For specific replacement options, it's best to consult the manufacturer's guidelines or a local dealer.
?
Where is the battery on the Gehl V276?
Quick answer
The battery on the Gehl V276 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or contact your local Gehl dealer. manuals.plus
?
What is the best replacement battery for the Gehl V276?
Quick answer
The best replacement battery for the Gehl V276 skid steer loader is typically a 12-volt battery with 950 cold cranking amps (CCA), often a group 31 battery. It's advisable to check the specific requirements in the owner's manual or consult a dealer for the most suitable options.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Gehl website for manufacturer information.
