The Gehl SL 7800 skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 700 CCA rating is low for Gehl skid-steers in this dataset.
How this battery compares
Compared with other Gehl skid-steer battery ratings in this dataset.
Battery specification
Model-specific replacement data
Replacement battery
What to match when buying
The Gehl SL7800 Skid Steer Loader uses a Group 31 flooded lead-acid battery with 950 CCA and M6 stud terminals, commonly sold as a Duracell Ultra Heavy Duty Flooded Battery
Battery location
Where the battery is mounted
The battery on the Gehl SL 7800 skid steer loader is typically located under the operator's seat or behind an access panel on the rear of the machine. For exact placement and replacement specifications, consult the Gehl SL 7800 operator's manual or contact a local GEHL dealer.
Model details
Equipment identity
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
What battery size fits the Gehl SL 7800?
Quick answer
Group 24. Best available fitment is based on closest same-brand/model-family match (SL 1620); confirm tray dimensions, terminal layout, and serial number before ordering.
How many CCA does the Gehl SL 7800 need?
Quick answer
700 CCA. Best available fitment is based on closest same-brand/model-family match (SL 1620); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.
What voltage battery does the Gehl SL 7800 use?
Quick answer
12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.
Where is the battery on the Gehl SL 7800?
Quick answer
The battery on the Gehl SL 7800 skid steer loader is typically located under the operator's seat or behind an access panel on the rear of the machine. For exact placement and replacement specifications, consult the Gehl SL 7800 operator's manual or contact a local GEHL dealer.
What is the best replacement battery for the Gehl SL 7800?
Quick answer
The Gehl SL7800 Skid Steer Loader uses a Group 31 flooded lead-acid battery with 950 CCA and M6 stud terminals, commonly sold as a Duracell Ultra Heavy Duty Flooded Battery

