The Gehl SL 1635 skid-steer battery size is Group 24, and it uses a 12-volt electrical system. Its 700 CCA rating is low for Gehl skid-steers in this dataset.
ModelSL 1635
BrandGehl
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
700 CCA
Battery size
Group 24
Battery location
See details below
How this battery compares
Compared with other Gehl skid-steer battery ratings in this dataset.
Cold cranking amps700 CCA
Low
LowAverageHigh
Low 105 CCAMedian 800 CCAHigh 950 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 24
Cold cranking amps
700 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 24 with about 700 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the Gehl SL 1635 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific details on battery specifications and replacement, it's best to consult your local GEHL dealer.
ID
Model details
Equipment identity
Brand
Gehl
Model
SL 1635
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Gehl SL 1635?
Quick answer
The official battery group size for the Gehl SL 1635 skid steer loader is Group 24. For replacement, it's important to choose a battery that meets the specifications outlined in the owner's manual.
?
How many CCA does the Gehl SL 1635 need?
Quick answer
The recommended battery for the Gehl SL 1635 skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 600 to 700 CCA. For specific replacement options, it's best to consult your local GEHL dealer for the exact specifications.
?
What voltage battery does the Gehl SL 1635 use?
Quick answer
The official battery voltage for the Gehl SL 1635 skid steer loader is 12 volts. For replacement, it's important to check the specific model requirements to ensure compatibility.
?
Where is the battery on the Gehl SL 1635?
Quick answer
The battery on the Gehl SL 1635 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific details on battery specifications and replacement, it's best to consult your local GEHL dealer.
?
What is the best replacement battery for the Gehl SL 1635?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 24 with about 700 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Gehl website for manufacturer information.
