Weight summary
The published Ford 4110 weight is 4,340–7,500 lb (1,968–3,402 kg). The primary figure used for comparisons is 4,715 lb (2,138 kg), listed as Operating. The published configurations span 3,160 lb, a 72.8% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Ford |
|---|---|
| Model | 4110 |
| Category | Farm tractor |
| Model years | 1982 – 1983 |
| Tractor type | Utility Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Shipping | — | 4,340 lb | 1,968 kg | 2.17 | — |
| Operating | — | 4,715 lb | 2,138 kg | 2.36 | — |
| Ballasted | — | 7,500 lb | 3,402 kg | 3.75 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- John Deere 5103 (4715 lb)
- John Deere 1030 (4720 lb)
- John Deere 1020 (4730 lb)
- Farmall 340 (4735 lb)
- Mahindra 4510 (4737 lb)
Closest comparable tractors
- John Deere 1030 (4720 lb)
- John Deere 1020 (4730 lb)
- New Holland TN65 (4665 lb, 57 hp)
- International Harvester 350 (4595 lb)
- Yanmar YM359 (4597 lb, 58.9 hp)
Ford 4110 weight FAQ
How much does a Ford 4110 weigh?
The Ford 4110 weighs 4,715 lb (2,138 kg) using the published Operating figure. Across the published configurations on this page, weight ranges from 4,340 to 7,500 lb (1,968 to 3,402 kg).
What is the operating weight of the Ford 4110 compared with shipping weight?
Published operating weight is 4,715 lb (2,139 kg), versus 4,340 lb (1,969 kg) for shipping weight. That is roughly 375 lb (8.6%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
How much does the Ford 4110 weigh with ballast?
The published ballasted weight is 7,500 lb (3,402 kg). That is up to 3,160 lb (72.8%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the Ford 4110 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 52nd percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 548 lb lighter than the peer-group average of 5,263 lb.
How wide is the Ford 4110 for transport?
The maximum published tractor width is 70.8 in (5.9 ft). That is 31.2 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Ford 4110 weight-to-horsepower ratio?
Using the page’s representative 4,715 lb weight and 56.8 hp power figure, the tractor carries about 83 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.


