The Farmall 450 tractor weighs 6,519 lb (2,957 kg) using its primary published weight. That places it around the 14th percentile among comparable row-crop tractors, lighter than about 86% of its peers. With 51.2 hp, the tractor carries about 127.2 lb of published weight per horsepower.
The published Farmall 450 weight is 6,519 lb (2,957 kg). The primary figure used for comparisons is 6,519 lb (2,957 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Representative published weight
Light
6,519 lb
Low5,300 lb
This model6,519 lb
Average14,006 lb
High23,810 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight6,519 lb (2,957 kg)
Overall weight bandHeavy
Tractor typeRow-Crop Tractor
Primary horsepower51.2 hp / 38.2 kW
Max length143 in (363 cm)
Max width84 in (213 cm)
Overview
Model information
Manufacturer
Farmall
Model
450
Category
Farm tractor
Model years
1956 – 1958
Tractor type
Row-Crop Tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
6,519 lb
2,957 kg
3.26
—
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase95.75 in (243 cm)
Length143 in (363 cm)
Width84 in (213 cm)
Height80 in (203 cm)
Power & weight ratios
Primary power51.2 hp (38.2 kW)
Power basisDrawbar (tested)
Weight per horsepower127.2 lb/hp
Weight per foot of length547 lb/ft
Wheelbase / length67%
Transport snapshot
Primary published weight6,519 lb (2,957 kg)
Maximum published weight6,519 lb (2,957 kg)
Maximum US-ton equivalent3.26 US tons
Maximum published width84 in (213 cm)
Published width over 102 inNo
Weight context
Weight range6,519 lb (2,957 kg)
Primary weight basisWeight
Peer positionLight among Row-Crop Tractor peers · 14th percentile
Physical size classMid-size
For transport planning, the representative published tractor weight is about 6,519 lb (3.26 US tons); published configurations reach 6,519 lb (3.26 US tons); the widest published tractor dimension is 84 in (7 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
Case IH 1394 (6520 lb)
J.I. Case 1394 (6520 lb)
Massey Ferguson 4708M (6506 lb)
Massey Ferguson 4709M (6506 lb)
John Deere 5215 (6504 lb)
Closest comparable tractors
John Deere 70 (6538 lb)
John Deere 720 (6790 lb)
John Deere 3010 (6500 lb, 55.09 hp)
Massey Ferguson 255 (6140 lb, 50 hp)
John Deere 620 (6800 lb, 48 hp)
Common questions
Farmall 450 weight FAQ
How much does a Farmall 450 weigh?
The Farmall 450 weighs 6,519 lb (2,957 kg) using the primary published weight figure.
Is the Farmall 450 a lightweight row-crop tractor?
Yes. The representative figure sits at about the 14th percentile, lighter than roughly 86% of the row-crop tractor peers. That puts it in the light range for this comparison. It is 7,487 lb lighter than the peer-group average of 14,006 lb.
How wide is the Farmall 450 for transport?
The maximum published tractor width is 84 in (7 ft). That is 18 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Farmall 450 weight-to-horsepower ratio?
Using the page’s representative 6,519 lb weight and 51.2 hp power figure, the tractor carries about 127.2 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Farmall 450 weigh?
The representative published weight is about 3.26 US tons, while the full published range is 3.26 US tons. Loaded transport weight can be higher than the tractor specification.
