The Doosan d20nxs Forklift (2022-2026) is characterised by low total width at 4.23 ft (1,290 mm) and low lifting height at 10.6 ft (3.23 m). Another useful figure is construction height at 7.09 ft (2,160 mm).
Specification profile
Forklift ⢠2022-2026
Total Width: 4.23 ft (1,290 mm)Construction Height: 7.09 ft (2,160 mm)Lifting Height: 10.6 ft (3.23 m)Centre of Gravity: 19.7 in (500 mm)
4.23 ft (1,290 mm)Total Width
7.09 ft (2,160 mm)Construction Height
10.6 ft (3.23 m)Lifting Height
19.7 in (500 mm)Centre of Gravity
4,409 lb (2 t)Nominal Load at COG
7.68 ft (2.34 m)Turning Radius
September 18August 15 –
VEmission level
How it compares
Low, average or high?
Turning Radius
Low
7.68 ft (2.34 m)
Low 6.43 ft (1.96 m)Typical 12 ft (3.65 m)High 26.2 ft (8 m)
Turning Radius is well below the typical figure.
Construction Height
Below average
7.09 ft (2,160 mm)
Low 6.79 ft (2,070 mm)Typical 9.06 ft (2,761 mm)High 14 ft (4,269 mm)
Construction Height is below the typical figure.
Lifting Height
Low
10.6 ft (3.23 m)
Low 8.99 ft (2.74 m)Typical 14.9 ft (4.53 m)High 53.5 ft (16.3 m)
Lifting Height is well below the typical figure.
Total Width
Low
4.23 ft (1,290 mm)
Low 3.51 ft (1,070 mm)Typical 6.76 ft (2,059 mm)High 13.9 ft (4,233 mm)
Total Width is well below the typical figure.
Centre of Gravity
Low
19.7 in (500 mm)
Low 19.7 in (500 mm)Typical 27.9 in (709 mm)High 4 ft (1,220 mm)
Centre of Gravity is well below the typical figure.
