The Cub Cadet XT1 LT42E coolant capacity is listed as 0.92 gal (3.5 L). It also lists coolant type ethylene glycol-based coolant.
Coolant capacity0.92 gal (3.5 L)
Coolant typeethylene glycol-based coolant
Cub Cadet XT1 LT42E Coolant Capacity
Cooling system capacity
0.92 gal (3.5 L)
Coolant type
ethylene glycol-based coolant
Engine horsepower
19 hp (14.2 kW)
Engine displacement
0.6 L (36.4 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
0.92 gal
Average
1 gal
Low
0.5 gal
High
2 gal
Engine horsepower comparison
This model
19 hp
Average
18 hp
Low
10 hp
High
30 hp
Engine displacement comparison
This model
0.6 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet XT1 LT42E Coolant and Engine Notes
Coolant capacity note
For the Cub Cadet XT1 LT42E, 0.92 gal (3.5 L) is the main coolant capacity captured. Use it as a refill planning number, then confirm the final level at the machine
Coolant type note
For the Cub Cadet XT1 LT42E, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant
Engine context note
The Cub Cadet XT1 LT42E engine data captured here is engine horsepower 19 hp (14.2 kW) and displacement 0.6 L (36.4 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
The practical service move for the Cub Cadet XT1 LT42E: buy enough coolant for 0.92 gal (3.5 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling
Cub Cadet XT1 LT42E Coolant Capacity FAQ
What is the Cub Cadet XT1 LT42E coolant capacity?
The Cub Cadet XT1 LT42E coolant capacity is listed as 0.92 gal (3.5 L) for cooling system capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Cub Cadet XT1 LT42E?
No. Use ethylene glycol-based coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Cub Cadet XT1 LT42E?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and the required mix. The captured mix for the Cub Cadet XT1 LT42E is the coolant mix specified in the manual.
How often should I change coolant in the Cub Cadet XT1 LT42E?
The captured coolant change interval for the Cub Cadet XT1 LT42E is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Cub Cadet XT1 LT42E coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Cub Cadet XT1 LT42E, the supporting engine data is horsepower 19 hp (14.2 kW) and displacement 0.6 L (36.4 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
