The Cub Cadet Tank L60 coolant capacity is listed as 1.59 gal (6 L). It also lists coolant type ethylene glycol-based coolant.
Coolant capacity1.59 gal (6 L)
Coolant typeethylene glycol-based coolant
Cub Cadet Tank L60 Coolant Capacity
Coolant capacity
1.59 gal (6 L)
Radiator capacity
1.59 gal (6 L)
Coolant type
ethylene glycol-based coolant
Engine horsepower
80.5 hp (60 kW)
Engine displacement
0.7 L (44 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
1.59 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
80 hp
Average
75 hp
Low
40 hp
High
125 hp
Engine displacement comparison
This model
0.7 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet Tank L60 Coolant and Engine Notes
Coolant capacity note
The Cub Cadet Tank L60 coolant spec points to 1.59 gal (6 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available
Radiator capacity note
Radiator capacity is listed as 1.59 gal (6 L). The full cooling system can be higher because coolant also sits in the engine and hoses
Coolant type note
For the Cub Cadet Tank L60, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant
Engine context note
The Cub Cadet Tank L60 engine data captured here is engine horsepower 80.5 hp (60 kW) and displacement 0.7 L (44 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
The practical service move for the Cub Cadet Tank L60: buy enough coolant for 1.59 gal (6 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling
Cub Cadet Tank L60 Coolant Capacity FAQ
How much coolant does the Cub Cadet Tank L60 take?
The main coolant amount captured for the Cub Cadet Tank L60 is 1.59 gal (6 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Cub Cadet Tank L60?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Cub Cadet Tank L60, the captured coolant type is ethylene glycol-based coolant.
What antifreeze mix does the Cub Cadet Tank L60 use?
The captured antifreeze mix for the Cub Cadet Tank L60 is the coolant mix specified in the manual. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Cub Cadet Tank L60 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
Why does the Cub Cadet Tank L60 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Cub Cadet Tank L60, the supporting engine data is horsepower 80.5 hp (60 kW) and displacement 0.7 L (44 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
