The Cub Cadet Tank 60 deck belt part number found is 754-04212. The deck belt size found is 85 in (2,159 mm) long by 0.5 in (13 mm) wide.
Cub Cadet Tank 60 Belt Size and Part Numbers
| Mower deck belt part number | 754-04212 |
|---|---|
| Mower deck belt length | 85 in (2,159 mm) |
| Mower deck belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet Tank 60 Belt Notes
| Mower deck belt note | The Cub Cadet Tank 60 deck belt listing shows part number 754-04212, length 85 in (2,159 mm) and width 0.5 in (13 mm). Use the listed value as a buying guide, not a blind substitute for the deck-specific parts diagram |
|---|---|
| Fitment note | For the Cub Cadet Tank 60, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money |
Cub Cadet Tank 60 Belt Size FAQ
Is a close belt length good enough for the Cub Cadet Tank 60 deck?
The deck belt length found is 85 in (2,159 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly
Can you replace the Cub Cadet Tank 60 belt with the same length but different width?
The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. A belt with the wrong top width can ride too high or too low in the pulley even if the length looks right
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
