The Cub Cadet LTX 1046 coolant capacity is listed as 0.48 gal (1.8 L). It also lists coolant type ethylene glycol-based coolant.
Coolant capacity0.48 gal (1.8 L)
Coolant typeethylene glycol-based coolant
Cub Cadet LTX 1046 Coolant Capacity
Coolant capacity
0.48 gal (1.8 L)
Cooling system capacity
0.48 gal (1.8 L)
Radiator capacity
0.48 gal (1.8 L)
Coolant type
ethylene glycol-based coolant
Engine horsepower
23 hp (17.2 kW)
Engine displacement
0.7 L (44.3 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
0.48 gal
Average
1 gal
Low
0.5 gal
High
2 gal
Engine horsepower comparison
This model
23 hp
Average
18 hp
Low
10 hp
High
30 hp
Engine displacement comparison
This model
0.7 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet LTX 1046 Coolant and Engine Notes
Coolant capacity note
The Cub Cadet LTX 1046 coolant spec points to 0.48 gal (1.8 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available
Radiator capacity note
The Cub Cadet LTX 1046 radiator figure is 0.48 gal (1.8 L). Treat it as radiator context, not always the complete refill amount
Coolant type note
The captured coolant type for the Cub Cadet LTX 1046 is ethylene glycol-based coolant. Do not mix unknown coolant types unless the label and manual say they are compatible
Engine context note
For the Cub Cadet LTX 1046, the supporting engine specs are engine horsepower 23 hp (17.2 kW) and displacement 0.7 L (44.3 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual
Refill note
For a coolant change on the Cub Cadet LTX 1046, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed
Cub Cadet LTX 1046 Coolant Capacity FAQ
What is the Cub Cadet LTX 1046 coolant capacity?
The Cub Cadet LTX 1046 coolant capacity is listed as 0.48 gal (1.8 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Cub Cadet LTX 1046?
No. Use ethylene glycol-based coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Cub Cadet LTX 1046?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and the required mix. The captured mix for the Cub Cadet LTX 1046 is the coolant mix specified in the manual.
How often should I change coolant in the Cub Cadet LTX 1046?
The captured coolant change interval for the Cub Cadet LTX 1046 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
What engine specs affect Cub Cadet LTX 1046 coolant capacity?
The captured engine context is horsepower 23 hp (17.2 kW) and displacement 0.7 L (44.3 cu in). Engine size is one reason coolant capacity changes between tractors.
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
