The Cub Cadet GTX 1054 mower blade part number found is 942-0741A. The blade set part numbers found are 742-0677A and 742-0677B. The blade measurement captured is length 18.5 in (470 mm) and thickness 0.204 in (5 mm). The deck uses 3 blades.
Blade part #942-0741A
Blade set part #742-0677A and 742-0677B
Blade sizelength 18.5 in (470 mm) and thickness 0.204 in (5 mm)
Blade count3 blades
Cub Cadet GTX 1054 Mower Blade Size and Part Numbers
Mower blade part number
942-0741A
Mower blade set part number
742-0677A and 742-0677B
Blade length
18.5 in (470 mm)
Blade thickness
0.204 in (5 mm)
Number of blades
3 blades
Blade type
high-lift, mulching, standard, bagging, and 3-in-1
Blade Size Comparison Chart
Blade length comparison
This model
18.5 in
Average
20 in
Low
16 in
High
23 in
Blade thickness comparison
This model
0.204 in
Average
0.188 in
Low
0.125 in
High
0.25 in
Cub Cadet GTX 1054 Blade Notes
Blade note
The Cub Cadet GTX 1054 blade listing captured here shows single blade part number 942-0741A, blade set part numbers 742-0677A and 742-0677B, and length 18.5 in (470 mm) and thickness 0.204 in (5 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering
Deck note
For the Cub Cadet GTX 1054, the captured deck information is blade count 3 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups
Blade type note
The blade type captured for the Cub Cadet GTX 1054 is high-lift, mulching, standard, bagging, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck
Fitment note
For the Cub Cadet GTX 1054, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering
Cub Cadet GTX 1054 Mower Blade FAQ
What should you check when fitting a 18.5 in (470 mm) blade on the Cub Cadet GTX 1054?
A 18.5 in (470 mm) blade needs the right center hole, lift style and deck clearance. That is a common lawn tractor blade length range, but it still needs the right center hole, sail/lift shape and deck fitment. Spin the blade by hand after fitting to confirm it clears the deck
What is the difference between the Cub Cadet GTX 1054 blade number and blade set number?
The captured single blade number is 942-0741A, while the captured blade set number is 742-0677A and 742-0677B. Use the single blade number for one replacement and the set number when replacing the full deck set
Can you swap Cub Cadet GTX 1054 blade types?
The blade type captured is high-lift, mulching, standard, bagging, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use 18.5 in (470 mm) as the fitment starting point
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official cubcadet.com before ordering replacement blades.
