The Cub Cadet GT 1222 coolant capacity is listed as 2.5 gal (9.5 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity2.5 gal (9.5 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix
Cub Cadet GT 1222 Coolant Capacity
Cooling system capacity
2.5 gal (9.5 L)
Coolant type
ethylene glycol-based coolant
Antifreeze mix
50/50 coolant and water mix
Engine displacement
0.7 L (45.6 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
2.5 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine displacement comparison
This model
0.7 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet GT 1222 Coolant and Engine Notes
Coolant capacity note
For service planning, the Cub Cadet GT 1222 should be treated as 2.5 gal (9.5 L) coolant capacity. That is a compact tractor cooling system where a normal premixed coolant jug may cover most of the refill
Coolant type note
Coolant type for the Cub Cadet GT 1222 is listed as ethylene glycol-based coolant. The safest move is to use coolant that matches the manual’s spec rather than mixing random formulas
Antifreeze mix note
The 50/50 coolant and water mix mix gives the Cub Cadet GT 1222 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note
The Cub Cadet GT 1222 engine data captured here is displacement 0.7 L (45.6 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
When refilling the Cub Cadet GT 1222, use 2.5 gal (9.5 L) as the planning number and 50/50 coolant and water mix as the mixture guide. Recheck the level after the thermostat opens
Cub Cadet GT 1222 Coolant Capacity FAQ
How much coolant does the Cub Cadet GT 1222 take?
The main coolant amount captured for the Cub Cadet GT 1222 is 2.5 gal (9.5 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Cub Cadet GT 1222?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Cub Cadet GT 1222, the captured coolant type is ethylene glycol-based coolant.
What antifreeze mix does the Cub Cadet GT 1222 use?
The captured antifreeze mix for the Cub Cadet GT 1222 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Cub Cadet GT 1222 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
Why does the Cub Cadet GT 1222 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Cub Cadet GT 1222, the supporting engine data is displacement 0.7 L (45.6 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
