Quick answer:
The Cub Cadet 126 mower blade part number found is 942-0741A. The deck uses 2 blades.
Blade part #942-0741A
Blade count2 blades
Cub Cadet 126 Mower Blade Size and Part Numbers
| Mower blade part number | 942-0741A |
|---|---|
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, standard, and 3-in-1 |
Cub Cadet 126 Blade Notes
| Blade note | The Cub Cadet 126 blade listing captured here shows single blade part number 942-0741A. Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the Cub Cadet 126, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the Cub Cadet 126 is high-lift, mulching, standard, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | For the Cub Cadet 126, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering |
Cub Cadet 126 Mower Blade FAQ
Which blade type should you use on the Cub Cadet 126?
The blade type captured is high-lift, mulching, standard, and 3-in-1. Use that against the captured fitment value 942-0741A. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured Cub Cadet 126 blade part number enough to buy from?
The captured blade part number is 942-0741A. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official cubcadet.com before ordering replacement blades.
