In specification terms, the Clark s30c forklift (2021-2026) shows typical engine power at 69.7 hp (52 kW) alongside below-average total width at 3.65 ft (1,114 mm). Another useful figure is construction height at 8.26 ft (2,518 mm).
Specification profile
Forklift • 2021-2026
Engine power: 69.7 hp (52 kW)Engine speed at max torque: 2,500 rpmTotal Width: 3.65 ft (1,114 mm)Construction Height: 8.26 ft (2,518 mm)
69.7 hp (52 kW)Engine power
2,500 rpmEngine speed at max torque
3.65 ft (1,114 mm)Total Width
8.26 ft (2,518 mm)Construction Height
17.9/18.4 km/hTravel Speed With / Without Load
0.66 US gal (2.5 L)Displacement
6,614 lb (3 t)Nominal Load at COG
6.92 ft (2.11 m)Turning Radius
How it compares
Low, average or high?
Engine power
Average
69.7 hp (52 kW)
Low 33.5 hp (25 kW)Typical 67.5 hp (50.3 kW)High 112 hp (83.8 kW)
Engine power is close to the typical figure.
Turning Radius
Below average
6.92 ft (2.11 m)
Low 5.91 ft (1.8 m)Typical 7.95 ft (2.42 m)High 12 ft (3.67 m)
Turning Radius is below the typical figure.
Construction Height
Above average
8.26 ft (2,518 mm)
Low 6.68 ft (2,035 mm)Typical 7.29 ft (2,221 mm)High 8.4 ft (2,561 mm)
Construction Height is above the typical figure.
Displacement
Below average
0.66 US gal (2.5 L)
Low 0.5 US gal (1.9 L)Typical 0.79 US gal (2.99 L)High 1.19 US gal (4.5 L)
Displacement is below the typical figure.
Total Width
Below average
3.65 ft (1,114 mm)
Low 3.1 ft (945 mm)Typical 4.33 ft (1,319 mm)High 6.94 ft (2,115 mm)
