Among the key figures for the Caterpillar gp18n forklift (2025-2026) are below-average engine power at 55 hp (41 kW) and low weight at 5,930 lb (2.69 t). Its published total width is 3.49 ft (1,065 mm).
Specification profile
Forklift • 2025-2026
Weight: 5,930 lb (2.69 t)Engine power: 55 hp (41 kW)Engine speed at max torque: 2,700 rpmTotal Width: 3.49 ft (1,065 mm)
5,930 lb (2.69 t)Weight
55 hp (41 kW)Engine power
2,700 rpmEngine speed at max torque
3.49 ft (1,065 mm)Total Width
7.02 ft (2,140 mm)Construction Height
10.8 ft (3.3 m)Lifting Height
19/19.5 km/hTravel Speed With / Without Load
151/1800 NmMaximum torque
How it compares
Low, average or high?
Engine power
Below average
55 hp (41 kW)
Low 33.5 hp (25 kW)Typical 67.5 hp (50.3 kW)High 112 hp (83.8 kW)
Engine power is below the typical figure.
Weight
Low
5,930 lb (2.69 t)
Low 5,644 lb (2.56 t)Typical 12,143 lb (5.51 t)High 26,358 lb (12 t)
Weight is well below the typical figure.
Turning Radius
Below average
6.5 ft (1.98 m)
Low 5.91 ft (1.8 m)Typical 7.95 ft (2.42 m)High 12 ft (3.67 m)
Turning Radius is below the typical figure.
Construction Height
Average
7.02 ft (2,140 mm)
Low 6.68 ft (2,035 mm)Typical 7.29 ft (2,221 mm)High 8.4 ft (2,561 mm)
Construction Height is close to the typical figure.
Displacement
Low
0.55 US gal (2.06 L)
Low 0.5 US gal (1.9 L)Typical 0.79 US gal (2.99 L)High 1.19 US gal (4.5 L)
Displacement is well below the typical figure.
Lifting Height
Average
10.8 ft (3.3 m)
Low 7.14 ft (2.17 m)Typical 11.1 ft (3.38 m)High 18 ft (5.5 m)
Lifting Height is close to the typical figure.
Visual overview
Key measurements
Measurements
Related measurements grouped for faster scanning.
Related measurements
Additional published measurements that share the same unit.
Overview
Model information
| Manufacturer | Caterpillar |
|---|---|
| Model | gp18n forklift |
| Category | Forklift |
| Model year / production | 2025-2026 |
Full specifications
Technical details
Performance
Engine power55 hp (41 kW)
Maximum torque151/1800 Nm
Engine speed at max torque2,700 rpm
Travel Speed With / Without Load19/19.5 km/h
Dimensions
Construction Height7.02 ft (2,140 mm)
Lifting Height10.8 ft (3.3 m)
Total Width3.49 ft (1,065 mm)
Turning Radius6.5 ft (1.98 m)
Capacity & weight
Weight5,930 lb (2.69 t)
Hoisting With / Without Load0.64/0.65 m/s
Lowering With Load0,52/0,5 m/s
Nominal Load at COG3,858 lb (1.75 t)
Engine & drivetrain
Displacement0.55 US gal (2.06 L)
Engine typeGK21E
Number of cylinders4.0
Setup & fitment
Standard tyresFront: 6.50-10-10PR / Rear: 5.00-8 -8PR
Other specifications
Model seriesGP
Centre of Gravity19.7 in (500 mm)
Max. Climbing Ability43/81 %
Related Posts:
