Caterpillar dp40n3 Forklift Specs (2021-2026)

by
The Caterpillar dp40n3 Forklift (2021-2026) stands out for low engine power at 72.4 hp (54 kW), while low weight comes in at 13,051 lb (5.92 t). Its published maximum torque is 192 lb-ft (260 Nm).
Specification profile

Forklift • 2021-2026

Weight: 13,051 lb (5.92 t)Engine power: 72.4 hp (54 kW)Engine speed at max torque: 1,800 rpmMaximum torque: 192 lb-ft (260 Nm)
13,051 lb (5.92 t)Weight
72.4 hp (54 kW)Engine power
1,800 rpmEngine speed at max torque
192 lb-ft (260 Nm)Maximum torque
4.64 ft (1,415 mm)Total Width
7.53 ft (2,295 mm)Construction Height
10.8 ft (3.3 m)Lifting Height
21.5/22.5 km/hTravel Speed With / Without Load
How it compares

Low, average or high?

Engine power

Low

72.4 hp (54 kW)
Low 38.9 hp (29 kW)Typical 121 hp (90 kW)High 355 hp (265 kW)

Engine power is well below the typical figure.

Weight

Low

13,051 lb (5.92 t)
Low 5,952 lb (2.7 t)Typical 32,141 lb (14.6 t)High 131,616 lb (59.7 t)

Weight is well below the typical figure.

Maximum torque

Low

192 lb-ft (260 Nm)
Low 105 lb-ft (143 Nm)Typical 257 lb-ft (349 Nm)High 563 lb-ft (763 Nm)

Maximum torque is well below the typical figure.

Turning Radius

Low

8.46 ft (2.58 m)
Low 6.43 ft (1.96 m)Typical 12 ft (3.65 m)High 26.2 ft (8 m)

Turning Radius is well below the typical figure.

Construction Height

Below average

7.53 ft (2,295 mm)
Low 6.79 ft (2,070 mm)Typical 9.06 ft (2,761 mm)High 14 ft (4,269 mm)

Construction Height is below the typical figure.

Displacement

Below average

0.87 US gal (3.3 L)
Low 0.47 US gal (1.79 L)Typical 1.15 US gal (4.35 L)High 2.86 US gal (10.8 L)

Displacement is below the typical figure.

Visual overview

Key measurements

Measurements

Related measurements grouped for faster scanning.

Construction Height7.53 ft (2,295 mm)
Total Width4.64 ft (1,415 mm)
Centre of Gravity19.7 in (500 mm)

Measurements

Related measurements grouped for faster scanning.

Lifting Height10.8 ft (3.3 m)
Lowering With Load0.5 m/s
Overview

Model information

Manufacturer Caterpillar
Model dp40n3
Category Forklift
Model year / production 2021-2026
Full specifications

Technical details

Performance

Engine power72.4 hp (54 kW)
Maximum torque192 lb-ft (260 Nm)
Engine speed at max torque1,800 rpm
Travel Speed With / Without Load21.5/22.5 km/h

Dimensions

Construction Height7.53 ft (2,295 mm)
Lifting Height10.8 ft (3.3 m)
Total Width4.64 ft (1,415 mm)
Turning Radius8.46 ft (2.58 m)

Capacity & weight

Weight13,051 lb (5.92 t)
Hoisting With / Without Load0.62/0.67 m/s
Lowering With Load0.5 m/s
Nominal Load at COG8,818 lb (4 t)

Engine & drivetrain

Displacement0.87 US gal (3.3 L)
Engine typeDO4EG-T
Number of cylinders4.0

Setup & fitment

Standard tyresFront: 8.25-15-14PR / Rear: 7.00-12-14PR

Other specifications

Model seriesDP
Centre of Gravity19.7 in (500 mm)
Max. Climbing Ability26.7 %

Related Posts: