Caterpillar dp100 Forklift Specs (1996-2010)

by
The Caterpillar dp100 Forklift (1996-2010) stands out for typical engine power at 129 hp (96.3 kW), while typical weight comes in at 32,562 lb (14.8 t). It also has total width of 8.25 ft (2,515 mm).
Specification profile

Forklift • 1996-2010

Weight: 32,562 lb (14.8 t)Engine power: 129 hp (96.3 kW)Total Width: 8.25 ft (2,515 mm)Construction Height: 9.56 ft (2,915 mm)
32,562 lb (14.8 t)Weight
129 hp (96.3 kW)Engine power
8.25 ft (2,515 mm)Total Width
9.56 ft (2,915 mm)Construction Height
13.1 ft (4 m)Lifting Height
24/29 km/hTravel Speed With / Without Load
3.94 ft (1,200 mm)Centre of Gravity
22,046 lb (10 t)Nominal Load at COG
How it compares

Low, average or high?

Engine power

Average

129 hp (96.3 kW)
Low 38.9 hp (29 kW)Typical 121 hp (90 kW)High 355 hp (265 kW)

Engine power is close to the typical figure.

Weight

Average

32,562 lb (14.8 t)
Low 5,952 lb (2.7 t)Typical 32,141 lb (14.6 t)High 131,616 lb (59.7 t)

Weight is close to the typical figure.

Turning Radius

Above average

13.1 ft (3.99 m)
Low 6.43 ft (1.96 m)Typical 12 ft (3.65 m)High 26.2 ft (8 m)

Turning Radius is above the typical figure.

Construction Height

Average

9.56 ft (2,915 mm)
Low 6.79 ft (2,070 mm)Typical 9.06 ft (2,761 mm)High 14 ft (4,269 mm)

Construction Height is close to the typical figure.

Lifting Height

Below average

13.1 ft (4 m)
Low 8.99 ft (2.74 m)Typical 14.9 ft (4.53 m)High 53.5 ft (16.3 m)

Lifting Height is below the typical figure.

Total Width

Above average

8.25 ft (2,515 mm)
Low 3.51 ft (1,070 mm)Typical 6.76 ft (2,059 mm)High 13.9 ft (4,233 mm)

Total Width is above the typical figure.

Visual overview

Key measurements

Measurements

Related measurements grouped for faster scanning.

Construction Height9.56 ft (2,915 mm)
Total Width8.25 ft (2,515 mm)
Centre of Gravity3.94 ft (1,200 mm)

Related measurements

Additional published measurements that share the same unit.

Construction Height9.56 ft (2,915 mm)
Total Width8.25 ft (2,515 mm)
Centre of Gravity3.94 ft (1,200 mm)
Overview

Model information

Manufacturer Caterpillar
Model dp100
Category Forklift
Model year / production 1996-2010
Full specifications

Technical details

Performance

Engine power129 hp (96.3 kW)
Travel Speed With / Without Load24/29 km/h

Dimensions

Construction Height9.56 ft (2,915 mm)
Lifting Height13.1 ft (4 m)
Total Width8.25 ft (2,515 mm)
Turning Radius13.1 ft (3.99 m)

Capacity & weight

Weight32,562 lb (14.8 t)
Hoisting With / Without Load0.46/0.48 m/s
Lowering With Load0.46/0.5 m/s
Nominal Load at COG22,046 lb (10 t)

Engine & drivetrain

Engine manufacturerMitsubishi
Engine type6 D 16
Transmission TypeW

Setup & fitment

Standard tyres4x/2SE(L)

Other specifications

Model seriesDP
Centre of Gravity3.94 ft (1,200 mm)
Max. Climbing Ability38 %

Related Posts: