The Caterpillar 6060 FS crawler excavator was introduced in 2013, with an operating weight of 1,254,430 lb (569 t), engine output of 3,004 hp (2,240 kW) and a bucket capacity of 44.47 yd³ (34 m³). Maximum digging depth is 8.9 ft (2.7 m), maximum horizontal reach is 53.8 ft (16.4 m) and it uses the 3512C (2x) engine.
Caterpillar Crawler Excavator Specifications
Crawler Excavator • Introduced 2013 • 3512C (2x)
Weight: 1,254,430 lb (569 t)Power: 3,004 hp (2,240 kW)Bucket: 44.47 yd³ (34 m³)Dig depth: 8.9 ft (2.7 m)
Key specifications
1,254,430 lb (569 t)Operating weight
3,004 hp (2,240 kW)Engine power
44.47 yd³ (34 m³)Bucket capacity
8.9 ft (2.7 m)Digging depth
53.8 ft (16.4 m)Horizontal reach
391,168 lbf (1,740 kN)Tear-out force
55.1 in (1,400 mm)Track width
2013Introduced
Useful excavator charts
Charts appear only when enough usable specifications are available.
Digging geometry
Dig depth
8.9 ft
Reach
53.8 ft
Transport dimensions
Length
41.2 ft
Width
28.6 ft
Height
28.8 ft
Model spec snapshot
Main numeric specifications for this excavator.
1,254,430 lbWeight
3,004 hpPower
44.47 yd³Bucket
391,168 lbfTear-out
How the Caterpillar 6060 FS compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
