The Caterpillar 314D CR crawler excavator was introduced in 2008, with an operating weight of 30,865 lb (14 t), engine output of 90 hp (67 kW) and a maximum digging depth of 17.8 ft (5.44 m). Maximum horizontal reach is 26.8 ft (8.18 m) and it uses the C4.2 Acert engine.
Caterpillar Crawler Excavator Specifications
Crawler Excavator • Introduced 2008 • C4.2 Acert
Weight: 30,865 lb (14 t)Power: 90 hp (67 kW)Dig depth: 17.8 ft (5.44 m)
Key specifications
30,865 lb (14 t)Operating weight
90 hp (67 kW)Engine power
17.8 ft (5.44 m)Digging depth
26.8 ft (8.18 m)Horizontal reach
19,109 lbf (85 kN)Tear-out force
19.7 in (500 mm)Track width
2008Introduced
Useful excavator charts
Charts appear only when enough usable specifications are available.
Digging geometry
Dig depth
17.8 ft
Reach
26.8 ft
Transport dimensions
Length
23.9 ft
Width
8.2 ft
Height
9.5 ft
Bucket capacity range
Minimum
0.4 yd³
Maximum
1 yd³
Model spec snapshot
Main numeric specifications for this excavator.
30,865 lbWeight
90 hpPower
19,109 lbfTear-out
How the Caterpillar 314D CR compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Engine power
90 hp
7% below avg
34th percentile
Digging depth
17.8 ft
In line with avg
31st percentile
Horizontal reach
26.8 ft
In line with avg
48th percentile
Tear-out force
19,109 lbf
In line with avg
46th percentile
Engine power90 hp
Low 70 hpAverage 97 hpHigh 124 hp
About 7% below the peer average.
Digging depth17.8 ft
Low 12.4 ftAverage 18.3 ftHigh 21.6 ft
In line with the peer average.
Horizontal reach26.8 ft
Low 23.9 ftAverage 27.4 ftHigh 31.3 ft
In line with the peer average.
Tear-out force19,109 lbf
Low 12,535 lbfAverage 18,966 lbfHigh 25,835 lbf
In line with the peer average.
This model Peer average
Crawler excavator information
Manufacturer
Caterpillar
Model
314D CR
Introduced
2008
Operating specifications
Operating weight
30,865 lb (14 t)
Minimum bucket capacity
0.39 yd³ (0.3 m³)
Maximum bucket capacity
0.97 yd³ (0.74 m³)
Bucket width
4 ft (1.21 m)
Maximum digging depth
17.8 ft (5.44 m)
Maximum horizontal reach
26.8 ft (8.18 m)
Tear-out force
19,109 lbf (85 kN)
Engine and emissions
Engine manufacturer
Caterpillar
Engine model
C4.2 Acert
Engine power
90 hp (67 kW)
Displacement
259 cu in (4.2 L)
Cylinder bore × stroke
4.02 × 5.12 in (102 × 130 mm)
Diesel particulate filter
No
Dimensions and transport
Transport length
23.9 ft (7.27 m)
Transport width
8.2 ft (2.49 m)
Transport height
9.5 ft (2.91 m)
Track width
19.7 in (500 mm)
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
