The Caterpillar 314C CR crawler excavator was introduced in 2002, with an operating weight of 32,210 lb (14.6 t), engine output of 90 hp (67 kW) and a maximum digging depth of 19.5 ft (5.95 m). Maximum horizontal reach is 28.3 ft (8.63 m) and it uses the 3064T engine.
Caterpillar Crawler Excavator Specifications
Crawler Excavator • Introduced 2002 • 3064T
Weight: 32,210 lb (14.6 t)Power: 90 hp (67 kW)Dig depth: 19.5 ft (5.95 m)
Key specifications
32,210 lb (14.6 t)Operating weight
90 hp (67 kW)Engine power
19.5 ft (5.95 m)Digging depth
28.3 ft (8.63 m)Horizontal reach
18,884 lbf (84 kN)Tear-out force
19.7 in (500 mm)Track width
2002Introduced
Useful excavator charts
Charts appear only when enough usable specifications are available.
Digging geometry
Dig depth
19.5 ft
Reach
28.3 ft
Transport dimensions
Length
23.9 ft
Width
8.2 ft
Height
9.2 ft
Bucket capacity range
Minimum
0.4 yd³
Maximum
1 yd³
Model spec snapshot
Main numeric specifications for this excavator.
32,210 lbWeight
90 hpPower
18,884 lbfTear-out
How the Caterpillar 314C CR compares
Comparison is against Caterpillar crawler excavators in the same broad operating-weight class where enough comparable data exists.
Engine power
90 hp
7% below avg
34th percentile
Digging depth
19.5 ft
7% above avg
70th percentile
Horizontal reach
28.3 ft
3% above avg
79th percentile
Tear-out force
18,884 lbf
In line with avg
34th percentile
Engine power90 hp
Low 70 hpAverage 97 hpHigh 124 hp
About 7% below the peer average.
Digging depth19.5 ft
Low 12.4 ftAverage 18.3 ftHigh 21.6 ft
About 7% above the peer average.
Horizontal reach28.3 ft
Low 23.9 ftAverage 27.4 ftHigh 31.3 ft
About 3% above the peer average.
Tear-out force18,884 lbf
Low 12,535 lbfAverage 18,966 lbfHigh 25,835 lbf
In line with the peer average.
This model Peer average
Crawler excavator information
Manufacturer
Caterpillar
Model
314C CR
Introduced
2002
Operating specifications
Operating weight
32,210 lb (14.6 t)
Minimum bucket capacity
0.39 yd³ (0.3 m³)
Maximum bucket capacity
0.97 yd³ (0.74 m³)
Bucket width
4 ft (1.22 m)
Maximum digging depth
19.5 ft (5.95 m)
Maximum horizontal reach
28.3 ft (8.63 m)
Tear-out force
18,884 lbf (84 kN)
Engine and emissions
Engine manufacturer
Caterpillar
Engine model
3064T
Engine power
90 hp (67 kW)
Displacement
259 cu in (4.2 L)
Cylinders
4
Cylinder bore × stroke
4.02 × 5.12 in (102 × 130 mm)
Diesel particulate filter
No
Dimensions and transport
Transport length
23.9 ft (7.28 m)
Transport width
8.2 ft (2.49 m)
Transport height
9.2 ft (2.81 m)
Track width
19.7 in (500 mm)
Disclaimer: Specifications can vary by configuration, market and attachment. Verify critical dimensions, capacities and ratings against the official machine documentation and the Caterpillar USA website.
