The Caterpillar 299D XE Serie 3 Deltalader skid-steer battery size is Group 4D, and it uses a 12-volt electrical system. Its 800 CCA rating is average for Caterpillar skid-steers in this dataset.
Model299D XE Serie 3 Deltalader
BrandCaterpillar
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
800 CCA
Battery size
Group 4D
Battery location
See details below
How this battery compares
Compared with other Caterpillar skid-steer battery ratings in this dataset.
Cold cranking amps800 CCA
Average
LowAverageHigh
Low 125 CCAMedian 850 CCAHigh 1400 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 4D
Cold cranking amps
800 CCA
RP
Replacement battery
What to match when buying
The recommended replacement battery for a Caterpillar 299D3 XE Compact Track Loader is part number 115-2422, a 12V heavy-duty maintenance-free wet battery with 1000 cold crank amps and 31 BCI.
LC
Battery location
Where the battery is mounted
The battery on the Caterpillar 299D XE Series 3 Skid Steer Loader is typically located under the seat or in the rear compartment of the machine. For specific battery replacement instructions, refer to the manufacturer's guidelines or service manual.
ID
Model details
Equipment identity
Brand
Caterpillar
Model
299D XE Serie 3 Deltalader
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Caterpillar 299D XE Serie 3 Deltalader?
Quick answer
Group 4D. Best available fitment is based on closest same-brand/model-family match (299D Serie 3 Deltalader); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Caterpillar 299D XE Serie 3 Deltalader need?
Quick answer
The recommended battery for the Caterpillar 299D3 XE Series skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 800 CCA. For specific battery specifications and options, it's best to consult the official Caterpillar website or your local dealer.
?
What voltage battery does the Caterpillar 299D XE Serie 3 Deltalader use?
Quick answer
The Caterpillar 299D XE Series 3 Skid Steer Loader typically uses a battery with a voltage of 12 volts. For specific replacement details, it's best to consult the manufacturer's guidelines or a dealer for the exact specifications.
?
Where is the battery on the Caterpillar 299D XE Serie 3 Deltalader?
Quick answer
The battery on the Caterpillar 299D XE Series 3 Skid Steer Loader is typically located under the seat or in the rear compartment of the machine. For specific battery replacement instructions, refer to the manufacturer's guidelines or service manual.
?
What is the best replacement battery for the Caterpillar 299D XE Serie 3 Deltalader?
Quick answer
The recommended replacement battery for a Caterpillar 299D3 XE Compact Track Loader is part number 115-2422, a 12V heavy-duty maintenance-free wet battery with 1000 cold crank amps and 31 BCI.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Caterpillar website for manufacturer information.
