The Case IH STX500QT Quadtrac tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 42 gpm | 159.0 lpm, and hydraulic type is pressure flow compensating.
Hydraulic Flow42 gpm | 159.0 lpm
Hydraulic Typepressure flow compensating
Lift Capacity19500 lbs | 8845 kg
Case IH STX500QT Quadtrac Hydraulic Capacity & Flow Specs
Hydraulic type
pressure flow compensating
Pump flow
42 gpm | 159.0 lpm
Case IH STX500QT Quadtrac Hitch, Remote & Lift Specs
Rear lift
19500 lbs | 8845 kg
Case IH STX500QT Quadtrac Useful Hydraulic Calculations
Rear lift per pump gpm
464.3 lb per gpm
Case IH STX500QT Quadtrac Hydraulic Comparison Charts
Pump flow comparison
This model
42 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Rear lift comparison
This model
19,500 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH STX500QT Quadtrac Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
hydraulic wet disc brakes
Case IH STX500QT Quadtrac Hydraulic Capacity FAQ
Why is the Case IH STX500QT Quadtrac hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH STX500QT Quadtrac, but pump flow is 42 gpm | 159.0 lpm, system type is pressure flow compensating, and lift is listed as 19500 lbs | 8845 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH STX500QT Quadtrac hydraulics feel fast or slow?
The useful speed clue is 42 gpm | 159.0 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH STX500QT Quadtrac?
On the Case IH STX500QT Quadtrac, 42 gpm | 159.0 lpm pump flow points to slower loader and cylinder movement and 19,500 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH STX500QT Quadtrac?
For implement matching, the useful checks are 42 gpm flow and 19,500 lb listed lift. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH STX500QT Quadtrac rear lift capacity strong?
The listed lift figure is 19500 lbs | 8845 kg, above the 15,500 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Will the Case IH STX500QT Quadtrac hydraulics handle long hydraulic jobs?
The useful heat clues are 42 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What hydraulic system does the Case IH STX500QT Quadtrac use?
The hydraulic system is listed as pressure flow compensating with 42 gpm | 159.0 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH STX500QT Quadtrac hydraulics?
For service planning, the system is listed as pressure flow compensating and flow is listed at 42 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
