The Case IH MXM140 Maxxum tractor engine horsepower is 142 hp | 105.9 kW, PTO horsepower is 115 hp | 85.8 kW, and the drawbar horsepower is 101.2 hp | 75.5 kW.
Engine HP142 hp | 105.9 kW
PTO HP115 hp | 85.8 kW
Drawbar HP101.2 hp | 75.5 kW
PTO Transfer81%
Displacement456 ci | 7.5 L
Case IH MXM140 Maxxum Horsepower Specs
Engine horsepower
142 hp | 105.9 kW
PTO horsepower claimed
115 hp | 85.8 kW
PTO horsepower tested
121.1 hp | 90.3 kW
Drawbar horsepower tested
101.2 hp | 75.5 kW
Case IH MXM140 Maxxum Useful Horsepower Calculations
PTO-to-engine power transfer
81% of engine hp reaches the PTO
Drawbar-to-engine power transfer
71.3% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio
88% drawbar hp vs PTO hp
Engine size per PTO horsepower
4 ci per PTO hp
PTO horsepower per liter
15.3 PTO hp per L
Engine size per engine horsepower
3.2 ci per engine hp
Engine horsepower per liter
18.9 engine hp per L
Fuel tank per PTO horsepower
0.7 gal per PTO hp
Rated speed per PTO horsepower
19.1 rpm per PTO hp
Case IH MXM140 Maxxum Engine Specs
Engine type
turbocharged intercooled diesel
Displacement
456 ci | 7.5 L
Bore and stroke
4.40×5.00 inches | 112 x 127 mm
Compression
17.0:1
Rated RPM
2200
Case IH MXM140 Maxxum Fuel, Cooling, Starting & Service Specs
Fuel capacity
75 gal | 283.9 L
Starter volts
12
Battery volts
12
Case IH MXM140 Maxxum Horsepower Comparison Charts
Engine horsepower comparison
This model
142 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
115 hp
Average
175 hp
Low
100 hp
High
320 hp
Drawbar horsepower comparison
This model
101.2 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
456 ci
Average
520 ci
Low
360 ci
High
750 ci
Rated RPM comparison
This model
2,200 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
4 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH MXM140 Maxxum Horsepower FAQ
How much horsepower does the Case IH MXM140 Maxxum have?
The listed engine output is 142 hp, below the 210 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 142 hp.
How much PTO horsepower does the Case IH MXM140 Maxxum have?
The listed PTO output is 115 hp, below the 175 hp benchmark average. For real use, size PTO implements below or near 115 hp rather than using a bigger engine-horsepower number.
How much drawbar horsepower does the Case IH MXM140 Maxxum have?
The listed drawbar output is 101.2 hp, below the 150 hp benchmark average. For pulling work, the safer assumption is about 101.2 hp at the drawbar before soil, ballast and tire limits are considered.
How much engine power reaches the PTO on the Case IH MXM140 Maxxum?
The PTO-to-engine transfer works out to 81%, from 142 engine hp to 115 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Case IH MXM140 Maxxum for pulling work?
The drawbar-to-engine transfer is about 71.3%, from 142 engine hp to 101.2 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Case IH MXM140 Maxxum better judged by PTO hp or drawbar hp?
The drawbar output is about 88% of PTO output, comparing 101.2 drawbar hp with 115 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH MXM140 Maxxum engine?
The engine displacement is 456 ci, below the 520 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Case IH MXM140 Maxxum engine stressed for its PTO horsepower?
The engine has about 4 cubic inches per PTO hp, using 456 ci and 115 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Case IH MXM140 Maxxum make?
The output density is about 15.3 PTO hp per liter, using 115 PTO hp and 7.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
