Case IH Magnum 400 Dimensions, Length, Width & Height

Quick answer:

The Case IH Magnum 400 dimensions found are: length is 256.1 inches | 650 cm, width is 100.4 inches | 255 cm, height is 132.9 inches | 337 cm, and wheelbase is 124 inches | 314 cm.

Length256.1 inches | 650 cm
Width100.4 inches | 255 cm
Height132.9 inches | 337 cm
Wheelbase124 inches | 314 cm

Case IH Magnum 400 Dimensions

Overall length 256.1 inches | 650 cm
Overall width Width across rear fenders: 100.4 inches | 255 cm | 100.4 inches | across rear fenders. 255 cm
Overall height 132.9 inches | 337 cm
Wheelbase 124 inches | 314 cm
Front tread 60 to 88 inches | 152 to 223 cm
Rear tread 57.9 to 90.3 inches | 147 to 229 cm

Case IH Magnum 400 Weight

Operating weight 32200 lbs | 14605 kg
Maximum weight 39683 lbs | 18000 kg

Case IH Magnum 400 Dimension Comparison Charts

Length comparison

This model

256.1 in

Average

190 in

Low

155 in

High

240 in

Width comparison

This model

100.4 in

Average

96 in

Low

78 in

High

120 in

Height comparison

This model

132.9 in

Average

125 in

Low

105 in

High

150 in

Wheelbase comparison

This model

124 in

Average

115 in

Low

95 in

High

145 in

Weight comparison

This model

32,200 lbs

Average

13,000 lbs

Low

8,000 lbs

High

22,000 lbs

Floor space footprint

This model

179 sq ft

Average

130 sq ft

Low

90 sq ft

High

200 sq ft

Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.

Case IH Magnum 400 Extra Dimension Notes

Storage and fit note Using the first listed dimension values, the Case IH Magnum 400 is about 256.1 inches | 650 cm long, about 100.4 inches | 255 cm wide, and about 132.9 inches | 337 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.

Case IH Magnum 400 Dimensions FAQ

Is the Case IH Magnum 400 a long tractor?

The Case IH Magnum 400 is a longer tractor at 256.1 in, which is above the 190 in benchmark average. Plan more shed, trailer and turning-space allowance than an average tractor in this range.

Is the Case IH Magnum 400 narrow enough for tight storage?

The listed width is middle-of-the-pack at 100.4 in, which is close to the 96 in benchmark average. It is not especially narrow, but it is not unusually wide either.

Is the Case IH Magnum 400 tall for a shed or garage?

The listed height is about normal at 132.9 in, which is close to the 125 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.

How much floor space does the Case IH Magnum 400 need?

The bare footprint is about 179 sq ft from a 21.3 ft length and 8.4 ft width. That is above the 130 sq ft benchmark, so it needs more floor space than average.

Does the Case IH Magnum 400 have a short or long wheelbase?

The wheelbase is average for the category at 124 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.

Is the Case IH Magnum 400 heavy for its size?

The listed weight is heavy for the category at 32,200 lbs, which is above the 13,000 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.

Will the Case IH Magnum 400 fit easily in storage?

Be careful. Based on length 256.1 in, width 100.4 in and height 132.9 in, at least one main dimension is above the category benchmark, so use the actual measured setup before planning clearance.

Official information note

Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.