The Case IH CS 86 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 13.2 gpm | 50.0 lpm.
Case IH CS 86 Hydraulic Capacity & Flow Specs
| Total hydraulic flow | 13.2 gpm | 50.0 lpm |
|---|
Case IH CS 86 Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear lift | 10804.5 lbs | 4900 kg |
Case IH CS 86 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH CS 86 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Disc brakes |
Case IH CS 86 Hydraulic Capacity FAQ
Why is the Case IH CS 86 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH CS 86, but total hydraulic flow is 13.2 gpm | 50.0 lpm and lift is listed as 10804.5 lbs | 4900 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH CS 86 hydraulics feel fast or slow?
The useful speed clue is 13.2 gpm | 50.0 lpm total hydraulic flow, close to the 14 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What matters most for loader speed on the Case IH CS 86?
On the Case IH CS 86, 13.2 gpm | 50.0 lpm total hydraulic flow is around normal for loader/cylinder speed and 10,804.5 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH CS 86?
For implement matching, the useful checks are 13.2 gpm flow, 10,804.5 lb listed lift, and II hitch. That combination is in the normal flow range for this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH CS 86 rear lift capacity strong?
The listed lift figure is 10804.5 lbs | 4900 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Will the Case IH CS 86 hydraulics handle long hydraulic jobs?
The useful heat clues are 13.2 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH CS 86 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 10804.5 lbs | 4900 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Case IH CS 86 hydraulics?
For service planning, flow is listed at 13.2 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
